ChatterBank0 min ago
zanussi fridge-freezer
1 Answers
I have a Zanussi "Intelli-set" fridge - freezer.
The freezer element is workink well but the fridge section isn't. The door light goes on, the open-door alarm works but the cooling doesn't. I haven't been able to find the instruction book so don't know if it is a case of pressing buttons or what. No buttons had been pressed at the time it went "pear-shaped". Any advice???
The freezer element is workink well but the fridge section isn't. The door light goes on, the open-door alarm works but the cooling doesn't. I haven't been able to find the instruction book so don't know if it is a case of pressing buttons or what. No buttons had been pressed at the time it went "pear-shaped". Any advice???
Answers
Best Answer
No best answer has yet been selected by nonomaybe. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.I can only relate the experiences with fridge/freezer combos here in the U.S., so if this isn't "spot on"... apologies. However, I expect one thing to be similar, that being their is only one cooling source. The actual workings provide cold air to the freezer and then a fan along wiht a thermostatically controlled door device allows some of that cold air to be blown into the fridge section. The thermostat control in the fridge section serves only to control the amount of cold air coming through. So, I would expect the door device or circulating fan to have failed or possibly the part of the thermostat that controls all of that...
You may be able to manually move the small door device to see if you can, temporarily, get cool air into the fridge but sounds like a technician is required...
Best of luck!
You may be able to manually move the small door device to see if you can, temporarily, get cool air into the fridge but sounds like a technician is required...
Best of luck!