ChatterBank0 min ago
problem fuse???
tonight i switched my dinning room light off and went to the kitchen and the lights wouldnt come on.so i checked the fuse and the 5amp had blown so i changed it.but every time i plug it back in and switch it on it bangs and blows again all my sockets are on fine???what could be the prob???
Answers
Best Answer
No best answer has yet been selected by sonic81. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.You are dealing with the 5A circuit - which is the lighting circuit only - nothing to do with any of the 13A wall sockets which are on a different circuit (or circuits) and a much larger fuse.
If you say the lighting circuits were OK, you switched off the dining room light, then the whole lighting went off, then it seems most likely that the bulb in the dining room went short circuit (though bulbs normally break when one switches them on, not off). Try taking that bulb out completely, renew the fuse and try again. If that fails, take ALL the light bulbs out that are controlled by that fuse, renew again and switch back on.
If the fuse now doesn't blow, progressively replace each bulb until you isolate which one is causing the short-circuit.
If the fuse now still blows with all the bulbs out, you will have to call out a comptenent person to faultfind for you as there is a short-circuit in the cabling or (more likely) in one of your light fittings.
If you say the lighting circuits were OK, you switched off the dining room light, then the whole lighting went off, then it seems most likely that the bulb in the dining room went short circuit (though bulbs normally break when one switches them on, not off). Try taking that bulb out completely, renew the fuse and try again. If that fails, take ALL the light bulbs out that are controlled by that fuse, renew again and switch back on.
If the fuse now doesn't blow, progressively replace each bulb until you isolate which one is causing the short-circuit.
If the fuse now still blows with all the bulbs out, you will have to call out a comptenent person to faultfind for you as there is a short-circuit in the cabling or (more likely) in one of your light fittings.
Before replacing the fuse and all the lamps, switch all the light off at the wall to each of the affected rooms
then once the fuse is replaced turn each room on one at a time
The one that blows the fuse is the faulty light
if the fuse blows immediatly the fault lies in the wiring
call spark for repair
then once the fuse is replaced turn each room on one at a time
The one that blows the fuse is the faulty light
if the fuse blows immediatly the fault lies in the wiring
call spark for repair