Donate SIGN UP

I've gotta cut 2" off . . !!!

Avatar Image
DebsyDoo | 18:47 Mon 30th Mar 2009 | ChatterBank
16 Answers
the whole length of a a window board - using a jigsaw (I've never used one before !) any advice ?
- other than have 999 dialled ready on my mobile phone !
Gravatar

Answers

1 to 16 of 16rss feed

Best Answer

No best answer has yet been selected by DebsyDoo. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
Why the panic? You are surely not proposing to do it in mid-air?

Lodge the board on a good solid surface, the jigsaw will sort it in about 30 seconds.
dont use too much pressure on the jig-saw
and keep your fingers out of the way debsy
- have a trial run on something else
Question Author
Cheers guys - but seriously, how do I keep it in a straight line ?
(it's 6' long !!)
You've drawn a pencil line along it of course. How critical is it that the line of cut is exactly straight. Probably not I would guess. Anyway, try not to cut your leg off.

you'll find it quite difficult keeping a straight line with a jigsaw, even when you've got experience. Try and keep the baseplate down on the wood with a fair ammount of pressure. If poss arrange the cut edge to be the least noticed. Good luck
Clamp it down to stop it moving and pencil in a cutting guide line... and take your time: 'measure twice, cut once'...
Question Author
No, you're probably right Gormless, I've got plenty of mastic !
i take it , a window board is a sill board
put a pencil line on it where you want to cut-put it down on something where your weight on it will keep it steady(even the back door step)-cut about two foot or so at a time if it makes things easier-then slide the sill board each time to let you work in a comfy position
Question Author
Thanx for all the tips . . .

Right, here we go then !
Have you done it yet?
-- answer removed --
-- answer removed --
Hi Debsy.

Tell you what I'd do - GALMI.

(Get a little man in).
-- answer removed --
you need to leave the pencil line on and finish it with a plane if you need a good edge on the window board.
Question Author
Zzzzzzzzzzzzzzzzzzz
zzzzzzzzzzzzzzzzzzzzzz
zzzzzzzzzzzzzzzzzzzzzzzzz (phew)
zzzzzzzzzzzz
zzzzzzzzzzzzzzzzzz
zzzzzzzzzzzzzzzzzzzzz (Oops)
zzzzzzzzz
zzzzzzzzzzzzz
zzzzzzzzzzzzzzzzzz nearly there !
zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz
zzzzzz
zzz
z done it !

DOH !

That WAS measure once . . . . wasn't it ?

Only jokin' !!!

It's not TOO bad - really (?)

. . .now where did I put that mastic ????

1 to 16 of 16rss feed

Do you know the answer?

I've gotta cut 2" off . . !!!

Answer Question >>