ChatterBank0 min ago
netgear wireless router
2 Answers
hi i have a netgear dg834g wireless router in my home.i need to secure the site as i think ours is the only one in the area that is not secure.i would be really grateful if someone could help us out.i have connected ethernet cable and been to the netgear settings page but then i was totally lost.any help to set this up would be great
Answers
1 to 2 of 2
Best Answer
No best answer has yet been selected by WIGGLE19. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.
Go back into the settings page.
You may have to look around a bit, this is based on my Netgear routers page, but at least you will know what to look for and do !
Under Setup on the left hand side of the page, there are two headings, Basic Settings and Wireless settings - click on wireless settings.
There will be a box to enter your network name (SSID) - choose a name (not your family name though !) and enter it. Region should be set to Europe, channel may default (I'm using 11) and set Mode to "g and b".
Under the heading Security Options, select WPA-PSK (TKIP) by clicking on the radio button beside that option.
Then enter a passphrase (a string of words is better than a single word and if you include numbers too, that's a good idea) and remember to write it down. Also remember that it is case sensitive, so if you use any capital letters you need to be certain you know which they are !
Click on the Apply button, then log out.
When you try to use a wireless connection to your router, select your network name and you will be prompted for the passphrase which you must enter exactly as you entered it on the router's settings page.
You may have to look around a bit, this is based on my Netgear routers page, but at least you will know what to look for and do !
Under Setup on the left hand side of the page, there are two headings, Basic Settings and Wireless settings - click on wireless settings.
There will be a box to enter your network name (SSID) - choose a name (not your family name though !) and enter it. Region should be set to Europe, channel may default (I'm using 11) and set Mode to "g and b".
Under the heading Security Options, select WPA-PSK (TKIP) by clicking on the radio button beside that option.
Then enter a passphrase (a string of words is better than a single word and if you include numbers too, that's a good idea) and remember to write it down. Also remember that it is case sensitive, so if you use any capital letters you need to be certain you know which they are !
Click on the Apply button, then log out.
When you try to use a wireless connection to your router, select your network name and you will be prompted for the passphrase which you must enter exactly as you entered it on the router's settings page.
these are the few urls. with the help of these urls you can setup the netgear router.
http://www.netgear.co.uk/wireless_adslrouter_d g834g.php
http://help.aol.co.uk/configure-your-netgear-d g834g-wireless-modem/article/20060802093109990 031
http://www.netgear.co.uk/wireless_adslrouter_d g834g.php
http://help.aol.co.uk/configure-your-netgear-d g834g-wireless-modem/article/20060802093109990 031
1 to 2 of 2
