News2 mins ago
hot cpu
anybody know anything about "speedfan", I know its only software but I use it to monitor my system temp, lately when cpu usage goes up above 50% the cpu temp reaches 100c and occasionally the pc shuts down, I dont know why this should suddenly start to happen but I immediately suspected overheating, I dont know any other way of checking whether the temp is ok but at the moment according to speedfan, cpu usage at 1% , cpu temp 68c, system 32%
Answers
Best Answer
No best answer has yet been selected by tfg. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.that's more than hot ... it's bl@@dy hot
depending on the processor you can expect upto 70c
I suspect with a system temp of 32 the case fan is sort of working
do as roj says though and clean the vents
check the heatsink for fluff ... the intel heat sinks are dust traps - the fins get clogged but often the assembly just looks a bit dusty
I use a stiff modeling paintbrush ... and one of the wife's (apparently very expensive) blusher brushes
gently gently to avoid dislodging the heatsink from the processor - or cracking the thermal paste which gives the conduction
the last option is to check the paste ... it's a one way test ... if it moves ... you have to remove the fan, clean the surfaces and reseal the components ... it's a pig of a job - make sure it IS your last option
depending on the processor you can expect upto 70c
I suspect with a system temp of 32 the case fan is sort of working
do as roj says though and clean the vents
check the heatsink for fluff ... the intel heat sinks are dust traps - the fins get clogged but often the assembly just looks a bit dusty
I use a stiff modeling paintbrush ... and one of the wife's (apparently very expensive) blusher brushes
gently gently to avoid dislodging the heatsink from the processor - or cracking the thermal paste which gives the conduction
the last option is to check the paste ... it's a one way test ... if it moves ... you have to remove the fan, clean the surfaces and reseal the components ... it's a pig of a job - make sure it IS your last option
just removed all the dust, system temp now 28C, cpu temp 48C, I dont have a case fan so when I put side panel back on the temp went up slightly so with an external fan on it the temp went back down to normal, now running a film and the cpu temp has gone up to 60C with cpu usage at 30%, the pc is less than 6 months old,
intel core 2 duo E7200 1066FSB
asus p5n73-am skt 775
guess a good internal fan will make a difference but I dont know if these temps are normal for my cpu anyway
intel core 2 duo E7200 1066FSB
asus p5n73-am skt 775
guess a good internal fan will make a difference but I dont know if these temps are normal for my cpu anyway
That's more like it.
My laptop CPU (Core 2 Duo) can get up to about 70C.
Watching films is more demanding, especially if it's a codec that the machine isn't optimised for (perhaps H.264 or flash), so the temperature will go up.
Keep an eye out for it, but as long as it doesn't get about 70C ish, then it'll be ok.
My laptop CPU (Core 2 Duo) can get up to about 70C.
Watching films is more demanding, especially if it's a codec that the machine isn't optimised for (perhaps H.264 or flash), so the temperature will go up.
Keep an eye out for it, but as long as it doesn't get about 70C ish, then it'll be ok.
You should check about it's cooling system. try to clean it's cooling fan and air ventilation area of laptop.
Just take a look here:
http://www.handstands.com/retail/computer-acce ssories/coollift.php
Just take a look here:
http://www.handstands.com/retail/computer-acce ssories/coollift.php
from the intel spec
http://ark.intel.com/cpu.aspx?groupID=35348
spec says
Tcase 74.1�C
Max TDP 65 Watts
Core Voltage 0.850v - 1.3625v
so 80c is too hot
http://ark.intel.com/cpu.aspx?groupID=35348
spec says
Tcase 74.1�C
Max TDP 65 Watts
Core Voltage 0.850v - 1.3625v
so 80c is too hot