Road rules5 mins ago
Decorating
We're going to redecorate my son's room which is currently emulsion walls, painted ceilings and skirting.
I think that I need to wash the walls and ceiling and sandpaper the skirting to prepare the room for repainting and would be grateful for advice on the easiest way to do this (what solution to use in the water for example) as well on how much the skirting needs to be sanded down and the best type of sandpaper to use.
I hate decorating so any hints and tips on easy but thorough ways to prepare would be much appreciated !
Thanks in advance.
I think that I need to wash the walls and ceiling and sandpaper the skirting to prepare the room for repainting and would be grateful for advice on the easiest way to do this (what solution to use in the water for example) as well on how much the skirting needs to be sanded down and the best type of sandpaper to use.
I hate decorating so any hints and tips on easy but thorough ways to prepare would be much appreciated !
Thanks in advance.
Answers
Best Answer
No best answer has yet been selected by shortee. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.we have never used sugar soap (or any other stuff) to wash walls or ceilings before painting/wallpapering them. even in the kitchen. we just fill in any cracks, give the walls and ceiling a bit of a dust down then paint or paper them.
nor do we sand down any paintwork. again, just go over them to remove any bits then undercoat and gloss.
i'm sure a professional decorator would be horrified but that's what we've always done and we've never had any problems in 34 years, our decorating looks great.
nor do we sand down any paintwork. again, just go over them to remove any bits then undercoat and gloss.
i'm sure a professional decorator would be horrified but that's what we've always done and we've never had any problems in 34 years, our decorating looks great.
Hi shortee, as it's in a bedroom by the sound of it I wouldn't bother with the sugar soap on walls and ceiling. Just make sure they are clean and free from cobwebs etc, and fill and sand any cracks in them. All the woodwork needs to be lightly sanded or more if it's badly marked or chipped, then wash it with sugar soap and rinse off. After undercoating the woodwork sand very lightly and wipe off using tack cloths which will pick up all the tiny bits that you probably won't see but will show through the finish coat of gloss. I usually use the green aluminium oxide sandpaper a medium grade. If you use it at the start then by the time you get to the undercoating and gloss it will be ok to use as a fine sandpaper as it will have beome finer.
Dunno what all the fuss is about. I've done a helluva lot of DIY (still do!) and never had to wash down emulsion before putting more on, except where there's been a grease-mark on the wall. Dust-free surface, yes. With gloss - sugar soap, yes - it's important that the old surface is totally grease and dirt free, but thereafter, almost any modern gloss paint will take quite happily to the original gloss without the need for laborious sanding. Do the skirting first - you can wipe later emulsion drips off the new gloss paint, but you'll never be able to wipe later gloss paint drips off new emulsion!!
There isnn't any need at all to wash down the walls and ceings these days. You had to wash the walls and ceilings in the old days when whitewash would be used which was made with all sorts of things including flour and water!! It was so thin it didn't cover too well.
Modern paints will be fine. BUT, if you have any blue tac on the walls, make sure you remove all trace of it first as paint, although it will cover over it, it then stands out like a sore thumb. How can you remove all trace? Simply scrape off as much as you can and use a tinyiest bit of washing up liquid (neat) on a cloth.
Good luck shortee! :-)
Modern paints will be fine. BUT, if you have any blue tac on the walls, make sure you remove all trace of it first as paint, although it will cover over it, it then stands out like a sore thumb. How can you remove all trace? Simply scrape off as much as you can and use a tinyiest bit of washing up liquid (neat) on a cloth.
Good luck shortee! :-)