ChatterBank0 min ago
2000 Citroen Xsara Auto
How do I check the transmission fluid levels and top it up?
I can't find the info in the handbook.
It's not my car, I'm trying to help a neighbour.
Thanks
I can't find the info in the handbook.
It's not my car, I'm trying to help a neighbour.
Thanks
Answers
Best Answer
No best answer has yet been selected by hc4361. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.It seems to be a little more complicated than you might think!
Quote:
"Complaint: The transmission oil level needs checking and/or changing
Remedy:
1. Ensure the engine has been switched off for at least 5 minutes to ensure an accurate oil reading.
2. Ensure the vehicle is raised and supported with the handbrake on.
3. Remove the left hand road wheel, remove the plastic clips that secure the left hand wheel arch plastic liner into place and remove the liner.
4. Clean the area around the filler/level plug, then unscrew it and clean it. Throw away the sealing washer.
5. When the plug is removed a certain amount of oil will trickle out. The correct level of oil is indicated by the oil level reaching the lower edge of the filler/level hole. Add oil until a trickle of new oil can be seen, the desired level is reached when the flow of oil stops. It is imperative the car is completely level during this procedure in order for a correct level to be taken.
6. When the correct level is achieved place a new sealing washer to the filler/level plug.
7. Refit the plug and tighten it to the required torque. Refit the wheel arch liner and the road wheel ensuring all bolts are tightened to the specific torque."
Source:
http://www.bba-reman....icasso_technical_help
Chris
Quote:
"Complaint: The transmission oil level needs checking and/or changing
Remedy:
1. Ensure the engine has been switched off for at least 5 minutes to ensure an accurate oil reading.
2. Ensure the vehicle is raised and supported with the handbrake on.
3. Remove the left hand road wheel, remove the plastic clips that secure the left hand wheel arch plastic liner into place and remove the liner.
4. Clean the area around the filler/level plug, then unscrew it and clean it. Throw away the sealing washer.
5. When the plug is removed a certain amount of oil will trickle out. The correct level of oil is indicated by the oil level reaching the lower edge of the filler/level hole. Add oil until a trickle of new oil can be seen, the desired level is reached when the flow of oil stops. It is imperative the car is completely level during this procedure in order for a correct level to be taken.
6. When the correct level is achieved place a new sealing washer to the filler/level plug.
7. Refit the plug and tighten it to the required torque. Refit the wheel arch liner and the road wheel ensuring all bolts are tightened to the specific torque."
Source:
http://www.bba-reman....icasso_technical_help
Chris
Most automatic transmission cars have a dipstick so you can check levels - must be one there. If in doubt why not ring up your nearest Citroen dealer, ask to speak to either parts or service dept and ask them. Even if you were to take it in to them they would be so quite this time of year, they would probably have a look at it for you and charge you nothing as it's only a possible top up if that.
hope you sort it.
hope you sort it.
Thing is the access for the Automatic is likely to be exactly the same as for the manual.
Remove wheel and plastic guard and locate dipstick on automatic transmission etc.
You could try this forum
http://www.citroen-ow...ndex.php?showforum=46
Remove wheel and plastic guard and locate dipstick on automatic transmission etc.
You could try this forum
http://www.citroen-ow...ndex.php?showforum=46
Related Questions
Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.