Crosswords3 mins ago
Battery
Answers
No best answer has yet been selected by brisyd. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.If all you've done is to clean the corrosion from the outside of the terminal and its cable, you haven't really helped much. The corrosion is caused by the contact of dissimilar metals... copper and lead in this case. The corrosion can and does form between the battery post and the cable connection. It can disrupt the flow of electricity to start your car. Best practice is to take the cables from their terminals, dip the end of the cable in a container of water mixed with common bicarbonate of soda. Do the same with the terminal itself. Rinse well and brush with a steel wire brush made for this purpose and available at any DIY store. (Don't splash any of the mixture on your clothes!) Use the mixture to clean the terminal as well. Then coat the terminal with Vasoline or other thick lubricant and replace the cable. A word about connecting and disconnecting batteries. Always disconnect the ground (negative) or black cable first but when replacing always reconnect the hot (positive) or red cable first. A tip to help prevent cable corrosion in the future. Place a small drop of Vaseline on top of the battery near the terminals and stick a copper coin (ours is a penny) to the grease. The penny will draw the corrosion and helps greatly to reduce further corrosion of the terminals... zinc actually works better but is harder to find. Replace the coins when corroded.
Good luck!