Crosswords2 mins ago
canon lide 20 .....
11 Answers
what pain in the rear!!
i´ve tried using chris´s link to download the cs 3 times without success. is it suppposed to be this frustratiing?? followed all the instructions to the letter. but nothing!
i´ll try again tomorrow
pn : (
i´ve tried using chris´s link to download the cs 3 times without success. is it suppposed to be this frustratiing?? followed all the instructions to the letter. but nothing!
i´ll try again tomorrow
pn : (
Answers
1 to 11 of 11
Best Answer
No best answer has yet been selected by piggynose. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.
I've just downloaded it in a couple of seconds!
OK, that won't help you directly but I've then uploaded it to here:
http://www.sendspace.com/file/2fdcgt
See if that link will work for you.
(When you've downloaded it, remember that it's an executable file. You need to double-click on it in order to install the driver).
Chris
OK, that won't help you directly but I've then uploaded it to here:
http://www.sendspace.com/file/2fdcgt
See if that link will work for you.
(When you've downloaded it, remember that it's an executable file. You need to double-click on it in order to install the driver).
Chris
You don't need any additional software .
Download the Scangear CS file to your PC, either by using my original link
http://www.theanswerb.../Question1082681.html
or from the one at the top I've provided at the top of this thread.
Double-click on the file which you've downloaded.
Now look for a folder which has the same name as the downloaded file (but without the .exe on the end of the file name). Unless you've selected an alternative destination it will be in the same place as the original download.
Double click on that folder. You'll see that it contains a ReadMe file and a program called SetupSG.
Double-click on SetupSG to run the driver installation program.
Restart your PC.
You'll then be able to import a scan from any program which uses TWAIN drivers (e.g. most image processing software, such as Photoshop or Irfanview). Note that you'll need to open the appropriate program first, then go to File > Acquire, in order to import your scanned image. (That's the way which I do things).
If you want a greater degree of automation in the process you'll also need to install the CanoScan Toolbox. (Either use the link in my original post or, if you experience problems, ask me to upload it to SendSpace or somewhere similar). The process will be similar to that used for installing the driver.
Chris
Download the Scangear CS file to your PC, either by using my original link
http://www.theanswerb.../Question1082681.html
or from the one at the top I've provided at the top of this thread.
Double-click on the file which you've downloaded.
Now look for a folder which has the same name as the downloaded file (but without the .exe on the end of the file name). Unless you've selected an alternative destination it will be in the same place as the original download.
Double click on that folder. You'll see that it contains a ReadMe file and a program called SetupSG.
Double-click on SetupSG to run the driver installation program.
Restart your PC.
You'll then be able to import a scan from any program which uses TWAIN drivers (e.g. most image processing software, such as Photoshop or Irfanview). Note that you'll need to open the appropriate program first, then go to File > Acquire, in order to import your scanned image. (That's the way which I do things).
If you want a greater degree of automation in the process you'll also need to install the CanoScan Toolbox. (Either use the link in my original post or, if you experience problems, ask me to upload it to SendSpace or somewhere similar). The process will be similar to that used for installing the driver.
Chris
Image Program ...
IrfanView illustrated below ..
File/Select TWAIN source.
Select the Lide Scanner Entry (It will say Canoscan Lide20 .. then the version)
All you do to use is to open the Photo program .. Select Acquire .. Image, etc, etc. That will open the Canoscan Scanner Placeholder.
Calibrate settings first before use. Tick the auto pre-scan (preview) and swiutch on/off auto-crop as necessary.
IrfanView illustrated below ..
File/Select TWAIN source.
Select the Lide Scanner Entry (It will say Canoscan Lide20 .. then the version)
All you do to use is to open the Photo program .. Select Acquire .. Image, etc, etc. That will open the Canoscan Scanner Placeholder.
Calibrate settings first before use. Tick the auto pre-scan (preview) and swiutch on/off auto-crop as necessary.
1 to 11 of 11
