Crosswords1 min ago
Which generator?
12 Answers
I will shortly be in the market to buy a generator, I know nothing about electricity so please dont confuse me with stuff like KVA and watts and amps etc.
I will need it to supply maybe a dozen normal lights with maybe a couple of halogen lights, it will need to be able to handle a few tools like a a bandsaw, lathe, circular saw and a 240 volt MIG welder. the generator will often need to run for 10 hours a day plus. It will not need to be running all these tools together as it will only be using them. The MIG will obviously draw most current and it is important that it runs the MIG without blowing fuses and trip switches all the time. also I imagine a diesel generator would be most suitable due to the cost of red diesel.
I will need it to supply maybe a dozen normal lights with maybe a couple of halogen lights, it will need to be able to handle a few tools like a a bandsaw, lathe, circular saw and a 240 volt MIG welder. the generator will often need to run for 10 hours a day plus. It will not need to be running all these tools together as it will only be using them. The MIG will obviously draw most current and it is important that it runs the MIG without blowing fuses and trip switches all the time. also I imagine a diesel generator would be most suitable due to the cost of red diesel.
Answers
1 to 12 of 12
Best Answer
No best answer has yet been selected by RATTER15. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.
There is a vast difference between the size of the load for a few lights and lot of equipment. The problem is that a generator big enough to run the welder is going to be severely underload when you just have a few lights. This is not good for the engine and very poor efficiency.
You will find this system is gong to cost a small fortune to run ten hours per day. You would be better off with two generators. One for the lights and small loads and one you only turn on when you need the big tools. This will pay off relatively quickly in running costs.
All generators are faced with the issue that they must sustain a fixed frequency so the engine must run at a constant speed regardless of the load and so run inefficiently with a short engine life. You need a more sophisticated technology on the little generator.
Inverter generators are designed to be run at a speed that varies with the load. They have an electronic box that converts the varying generator output into a stable fixed frequency and voltage. The automatic engine controller only runs the engine as fast as is needed for the load. The fuel and mainenance savings are spectacular, not to mention the noise factor.
You will find this system is gong to cost a small fortune to run ten hours per day. You would be better off with two generators. One for the lights and small loads and one you only turn on when you need the big tools. This will pay off relatively quickly in running costs.
All generators are faced with the issue that they must sustain a fixed frequency so the engine must run at a constant speed regardless of the load and so run inefficiently with a short engine life. You need a more sophisticated technology on the little generator.
Inverter generators are designed to be run at a speed that varies with the load. They have an electronic box that converts the varying generator output into a stable fixed frequency and voltage. The automatic engine controller only runs the engine as fast as is needed for the load. The fuel and mainenance savings are spectacular, not to mention the noise factor.
We have heaps of power cuts so rely on a generator quite frequently. We have a 5kva which runs all the lights refrigerators , tvs one hot plate or the oven or a kettle. However a lot of these generators are just back up generators and should not run for more than 5 hours at a time. I also have a 165kva cummins engine genny which runs everything in the motel To run something for 10 hours it would need to be. A professional machine. It is expensive to run a generator.
Where I live solar is well worht he investment. The beauty of solar is that it tapers off late in the day which is ideal for bringing the batteries to float.
I have a 1.5 KW system and we rarely run the generator. I am thinking of putting on another 600 Watts and that will virtually eliminate the need for the generator.
I have a 1.5 KW system and we rarely run the generator. I am thinking of putting on another 600 Watts and that will virtually eliminate the need for the generator.
1 to 12 of 12
