1.000 Migrants Since Christmas Day
News0 min ago
No best answer has yet been selected by HappyFace. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.The condensation inside is because the house has warm, moist air, which loses its moisture when it hits something cold. A de-humidifier will make the warm air less moist.
Putting the windows on a vent setting, or leaving some slightly open (at least when you are in) will increase the ventilation and reduce the moisture content of the air inside.
Certain things (showers, drying washing inside) add to the humidity and extra ventilation would be needed.
firstly 3 things must be adequate -
1 heating, 2 insulation, 3 ventilation.
Heating is important because it holds more moisture than cold air. As the air warms it helps water to evaporate into its gaseous state which is called water vapour. The amount of water vapour is referred to as the relative humidity.
Insulation is important because it helps the fabric of the building stay warmer and makes heating more efficient.
Now that the water is in its gaseous state we need to remove it from the building by VENTILATION. If adequate ventilation is not provided when the air cools down it will reach the dew point and release the vapour as liquid water.
This cycle needs to be broken and you should also know that if the condensation you can see is causing damage to paint work then there will also be interstitial condensation occurring within the wall plaster etc. I would suspect that you have black spot mould growing around the window frames and possibly behind furniture.
Dehumidifiers only work in the room they are in, are noisy at night so usually get switched off and are expensive to run. I personally think a positive input ventilation system would benefit your property and your health as damp conditions are bad for you. these system are cheap to run, virtually silent in operation and they do work!