Sky +No signal quality bar on Input 2

[conman]

May need an expert on this !!Pace box,been back to Pace said ok.Upgraded to Region 2 dish was massive improvement now some picture pixellation on recordings. Hadnew LNB .Aerial meter tested, no line of sight obstructions. HELP!!

[Mattk]

i had a problem with mine recently which also left me with no input 2 signal.got the engineers out and they unscrewed both signal leads from the back and one was heavily corroded(input 1 bizarrely).they clipped it back by a few inches until the lead was good and then re-fitted the plug.all was fine.my problem was a break in the sleeving on the wire on the outside of my house which had let water in.i squeezed as much excess water as i could from the sleeve then wound insulating tape around the cut to seal it.have had no problems since.

its a long shot but you may also have this problem.sky will charge �50 to come out and fix the problem but at least they will solve it and then guarantee that fix for 3 months minimum.

[Kerplunk]

If you are experiencing pixellation on when watching recordings but everything else is fine, it could be the disk in the Sky + box. Try doing a full reset using the installer menu and see if that helps. (It will format the disk so watch all programs first!!)