Donate SIGN UP

ford ka 1..3 heater not working "Y" REG

Avatar Image
cherrypicker | 11:15 Mon 09th Jan 2006 | Motoring
8 Answers
recently the heater has been blowing cold air ,and no matter what position dial is in , it is still cold. the problem seemed to start when i had a cd player put in by halfords , not that im saying thay did it but it was about the same time. any help appreciated
Gravatar

Answers

1 to 8 of 8rss feed

Best Answer

No best answer has yet been selected by cherrypicker. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.

This problem has just happened to my ford fiesta.


This is the most commen problem of the Ford KA and Fiesta range.


Firstly it is nothing to do with your stereo being fitted.


Your thermostatic valve has broken.


If you lift up your bonnet on the car and look to the back, where your windsceen motor is, You will see a small unit with 2 hoses coming from either side of the unit. The unit is the broken part.


Drain the engine of water. Unclip the hoses by releasing the spring clips. Remove the old unit.


Reconnect the hoses back to the new unit..Place unit back in housing, fill car with water and antifreeze.


Now for the worst bit. The part is a Ford genuine part only so you do have to pay full price and at 46.50 for such a little part. You could try a scrap yard but I scouered 5 yards and all i got from the hillbillies that worked there was this is the first part that goes of these cars when they come into scrap yards. Hope this Helps

A very good answer above but I do not believe in coincidences. Is the CD player close to the Heater controls? I am sure if you asked Halfords to check to see if they disturbed anything they would,


Good luck with it.

have youhad any luck yet.
Sounds like halfords have somehow unattached the heater control cable from the knob. Does the switch turn more freely than usual? with less resistance?

I to have the same problem. The engine runs at the right temperature and the heater valve has been changed, (nothing wrong with the old one!!). I have investigated this carefuly and firstly the heater should not be effected by the thermstat. The opening of the thermostat brings the radiator into the loop and the heater should still receive hot water through the matrix. What I have discovered is that the water system is not presurising?? The next step is to chexk the expansion cap and see if it has a leek. After this I will try the water pump. Theory being that if this has broken then the water is not being pumped. Normally you would expect this to cause the engine to overheat, but mine isn't. Beyond this I have no idea - Any help would be appreciated. (Car model Fiesta 1.8DT Mk5.)

I have a similar problem with my 2002 KA with A/C. But I'm getting constant HOT AIR and not cold. Could this be a thermostat problem or heater valve ??

geoff
Hi everyone! I have a ford streetka ( ka convertible) and my heating and air con has packed up..
i have no thermostat in the car at the mo due to it overheating a while back so it was simply taken out...
ive had no heating or air con since,and have now today gone and bought a new thermo...the guy in the garage told me that no air at all is blowing out and that it could be loose wiring or the heat valve has gone!!
also my car seems to be making a loud fan like ( hoovering sound ) sometimes when im driving at a lowish speed is this anything to do with having no thermo....
any advice would be very greatful xxx
hi chelletiax, i just bought the same car 2004 model, your hoovering sound is the radiator fan coming on to cool the system, my ka does not blow hot exept when i am driving it hard and fast and i have no idea why, can anyone help ??

1 to 8 of 8rss feed

Do you know the answer?

ford ka 1..3 heater not working "Y" REG

Answer Question >>

Related Questions

Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.