Crosswords0 min ago
seized stopcock
What is the best lubricant to use on a stopcock? Mine are regularly far too stiff to turn easily even though I do a half turn back after I have fully opened them. Some time back when I mentioned that I used WD40 someone said that it was not the right stuff to use and that some other form of grease was better. Can anyone help? Is vaseline suitable or is it a different grease that should be used?
Answers
Best Answer
No best answer has yet been selected by Stargazer. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.Is it a common one like this.............
http:// www.scr ewfix.c ...r-st op-tap- 15mm/15 440
If it is, open right up and give it something like WD40. I can't imagine that any type of grease would do any harm.
Slightly unscrew the gland nut (at the bottom of the spindle). That'll free up the movement.
If it's still unworkable, then buy a new stop-tap; turn off the supply in the pavement; unscrew the whole valve out of the tap body, and replace with the new one. You won't need the new body.
http://
If it is, open right up and give it something like WD40. I can't imagine that any type of grease would do any harm.
Slightly unscrew the gland nut (at the bottom of the spindle). That'll free up the movement.
If it's still unworkable, then buy a new stop-tap; turn off the supply in the pavement; unscrew the whole valve out of the tap body, and replace with the new one. You won't need the new body.