Jobs & Education3 mins ago
I HAVE A 2002 KA , THE HEATER AND BLOWERS ARE NOT WORKING. I HAVE REPLACED THE RESISTOR IN THE PASSANGER FOOT WELL AND THE HEATER CONTROL VALVE BELOW THE WINDSCREEN. I HAVE ALSO REPLACED THE HEATER MOTOR FAN. BUT THE BLOWERS ARE STILL NOT WORKING. PLEASE
I HAVE A 2002 KA , THE HEATER AND BLOWERS ARE NOT WORKING. I HAVE REPLACED THE RESISTOR IN THE PASSANGER FOOT WELL AND THE HEATER CONTROL VALVE BELOW THE WINDSCREEN. I HAVE ALSO REPLACED THE HEATER MOTOR FAN. BUT THE BLOWERS ARE STILL NOT WORKING. PLEASE HELP ME.
Answers
Best Answer
No best answer has yet been selected by LUCY678. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.I know nothing about this vehicle specifically, but have had a similar problem. There is a resistor pack somewhere in the blower motor circuit which allows the fan to operate at different speeds, i.e. if all resistances are operative, the fan turns slowly, and obviously at top fan speed no resistors are involved. Replacing the resistor pack with one from a scrapyard did the trick for me. The part was £10 and took about 15 mins. for me to fit. I think the resistor you have replaced in the footwell is probably the fuse for the circuit. You need to find the resistor pack.
The actual location is just above the floor mat, it's black (approx 8cm and 4cm wide) with four wires coming out (the first set of wires you come to). There is one screw holding it in at the bottom. In the passenger side.
Lucy - the above is from a Google search I did. It rfers to the resistor pack for the blower motor.
Good luck!
Lucy - the above is from a Google search I did. It rfers to the resistor pack for the blower motor.
Good luck!
Related Questions
Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.