Quizzes & Puzzles0 min ago
Humax Pv-9200T
10 Answers
The above has been perfect until I unplugged the scart lead for a few minutes this morning.
Now if I press record the Humax shows that it is recording and sounds as if it is, but it isn't. Nothing shows on the Menu. If I press stop recording it asks me if I want to stop recording Graham Norton or Only Connect, neither of which is on now. So the Humax thinks it is about 8.30 on Monday for Only Connect and it also thinks it's Friday night about 11 ish.
I have reinstalled factory settings.
The Humax Support Team have no idea..........anyone here know what else I can try? Thank you.
Now if I press record the Humax shows that it is recording and sounds as if it is, but it isn't. Nothing shows on the Menu. If I press stop recording it asks me if I want to stop recording Graham Norton or Only Connect, neither of which is on now. So the Humax thinks it is about 8.30 on Monday for Only Connect and it also thinks it's Friday night about 11 ish.
I have reinstalled factory settings.
The Humax Support Team have no idea..........anyone here know what else I can try? Thank you.
Answers
Best Answer
No best answer has yet been selected by gness. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.I would think not. I would more likely suspect a factory could do something like that but it may not be the case.
Info for firmware updates can be found here:
http:// www.hum axdigit al.com/ uk/supp ort/dow nloadce nter_mo del.asp x?categ ory_seq =56
It also states:
Note: No recorded programmes will be removed when you do a Default Setting however your schedules, favourites list, and menu settings will revert back the default values.
Info for firmware updates can be found here:
http://
It also states:
Note: No recorded programmes will be removed when you do a Default Setting however your schedules, favourites list, and menu settings will revert back the default values.
I don't know but it sounds strange to me the unplugging and replugging a scart lead would cause this issue.
One hopes it is a setting issue rather than something physical. Does the settings screen give sufficient options for you to correct them by hand ? Starting with date/time ?
PS you have tried turning it off, waiting for a whle, then rebooting it, have you ?
One hopes it is a setting issue rather than something physical. Does the settings screen give sufficient options for you to correct them by hand ? Starting with date/time ?
PS you have tried turning it off, waiting for a whle, then rebooting it, have you ?
Another thought if the problem persists, it is just possible that the Hard Disk Drive in the unit is nearing its end of life. I had a similar problem in the past with Sky+ boxes that had the same symptoms as you are experiencing. Had to replace the dive in the end.
There are some windows based programs available for PC that will enable access to the PV-9200T unit to enable copying / backup of recordings etc in the event of having to replace a Hard Disk.
Take a look at: http:// humaxdi sk.wiki spaces. com/Hum axRW
Might be worth using this to check / see if the disk iresonds and s readable ok.
There are some windows based programs available for PC that will enable access to the PV-9200T unit to enable copying / backup of recordings etc in the event of having to replace a Hard Disk.
Take a look at: http://
Might be worth using this to check / see if the disk iresonds and s readable ok.