So Lets Shaft Our Farmers.....
News0 min ago
Whilst tiling my kitchen wall I removed from the wall an emersion heater switch. I removed the fuse for the circuit from the consumer unit but noticed when I checked the voltage that there was still a residual current running through the switch (about 5 volts). I turned the power off completely and obviously the residual curent went.
Firstly, why was there residual current in the switch after removing the circuit fuse from the consumer unit and secondly, would it have been safe to work on even with this current running through the switch.
No best answer has yet been selected by xrayspecs. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.This is probably an inducted, capacitive or resistive leakage induced voltage. If you disconnected the fuse on the live side, the neutral can still have a potential to earth. It is also possible to get this effect across live switch contacts that are only 3 mm apart. It might be worth having your earthing system checked and possibly upgraded to a positive multiple earth system (PME) if it is available and a resistance test.
Without knowing exactly why or how you got this residual voltage or even if you had the right fuse, I can only say it would be safer to switch the main power off and insulate the wires with a terminal block or tape before switching on again just in case.