Quizzes & Puzzles1 min ago
Stop
Red traffic lights means stop - amber also means stop .
So why have an amber light ?
So why have an amber light ?
Answers
Best Answer
No best answer has yet been selected by Bazile. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ."AMBER means ‘Stop’ at the stop line. You may go on only if the AMBER appears after you have crossed the stop line or are so close to it that to pull up might cause an accident"
From: http:// www.dir ect.gov .uk/pro d_consu m_dg/gr oups/dg _digita lassets /@dg/@e n/docum ents/di gitalas set/dg_ 070561. pdf
From: http://
amber is to warn you that the light is about to turn red and to prepare to stop.
you can still go through an amber if you are more or less on top of the line.
otherwise people would be getting points and fines all the time, as if the light went red the instant they are crossing the line, the camera would flash.
you can still go through an amber if you are more or less on top of the line.
otherwise people would be getting points and fines all the time, as if the light went red the instant they are crossing the line, the camera would flash.
A lot of traffic light signals , change very rapidly from Amber to Red .
Take this scenario - you are approaching a set of lights - at the junction there is also a traffic light camera .
You are so close to the stop line it that to pull up might cause an accident ; so by the time you cross the line the lights are on red .
Would you then run the risk of being flashed by the traffic light signal camera ?
Take this scenario - you are approaching a set of lights - at the junction there is also a traffic light camera .
You are so close to the stop line it that to pull up might cause an accident ; so by the time you cross the line the lights are on red .
Would you then run the risk of being flashed by the traffic light signal camera ?
I'm here - look .
What I meant was that i had the question answered as to why we have an amber light .
The explanation included , when you can proceed over the stop line ; which has prompted me to ask about traffic light cameras and the possibility of being flashed , when you are so close top the stop line that it is safer to proceed over it - but you then run the risk of being flashed ; at some lights , where the time between the amber and red light is just about less than instantaneous ( if you see what i mean ) .
Dony worry too much about answering further - it's not critical to nail this down before the messiah puts in an appearance again
What I meant was that i had the question answered as to why we have an amber light .
The explanation included , when you can proceed over the stop line ; which has prompted me to ask about traffic light cameras and the possibility of being flashed , when you are so close top the stop line that it is safer to proceed over it - but you then run the risk of being flashed ; at some lights , where the time between the amber and red light is just about less than instantaneous ( if you see what i mean ) .
Dony worry too much about answering further - it's not critical to nail this down before the messiah puts in an appearance again
Traffic light cameras do not flash cars which cross the line immediately the red light shows. They allow a second or so after red appears before flashing. Their aim is to detect drivers who blatantly run red lights.
Traffic lights on roads with speed limits higher than 30mph have their amber display set to a longer period. Looking at those in 30mph limits, travelling at 30mph a car is covering 44 feet a second. The normal stopping distance at that speed is 75 feet. This means you should be able to stop in well under two seconds. It is most unlikely that you will find a camera set to operate at less that two seconds after amber appears. So provided you stick to the speed limit (which you should) and provided you are prepared to stop when approaching any set of traffic lights (which you should be) you will not be flashed by a traffic light camera.
Traffic lights on roads with speed limits higher than 30mph have their amber display set to a longer period. Looking at those in 30mph limits, travelling at 30mph a car is covering 44 feet a second. The normal stopping distance at that speed is 75 feet. This means you should be able to stop in well under two seconds. It is most unlikely that you will find a camera set to operate at less that two seconds after amber appears. So provided you stick to the speed limit (which you should) and provided you are prepared to stop when approaching any set of traffic lights (which you should be) you will not be flashed by a traffic light camera.