ChatterBank1 min ago
air con (part 2)...
just tried quapmoc's advice, but to no avail. Therefore I have found out that my air con is not working. There are many reasons why air con stop working - blown fuse, leak, needs regassing etc etc. The air con light on the button still comes on when I press, but usually when you turn the air con on, you notice a slight dip in engine power when stationery, as the air con takes power from the engine, very much like when you turn your rear demister on. My gut feeling is therefore that the fuse has blown.. How do I know which is causing the problem? are there tell tell signs??
Answers
Best Answer
No best answer has yet been selected by spaced. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.yes i know how to check a fuse, but the air con fuse is a relay fuse, and therefore not seethrough. Before I go ahead and buy a relay fuse, I was asking how you can tell whether the air con is not working due to either the fuse, lack of gas etc etc. To a person who is a dab hand at cars, there must be a slight tell tale sign to suggest that its more than likely the fuse than anything else? The fact that the there is no sound or anything suggesting that the air con is coming on, suggests to me that its prbably the fuse, but I am unsure. Can anyone else help?
Hi spaced, well if you look at the engine you should be able to figure out which belt is driving the a/c pump, the pump has pipes etc.. attached and connects to the small radiator in front of the main radiator, on most cars the a./c pump has an electric clutch on the front so that the inner part does not turn when the a/c is off and does turn when the a/c is on, check this out first, if it is turning then the a/c should get cold.
If it turns but does not get cold then follow the a/c pipes around the engine compartment, somewhere is usually a small gadget in a pipe with a glass window in it which allow you to see the gas/liquid passing (or at least bubbles in the liquid gas), find this and clean the glass so that you can see inside. Run the engine with the a/c off and watch the glass and then get somebody to switch on the a/c, you should be able to see the gas/liquid start to flow if the pump is working OK.
If it turns but does not get cold then follow the a/c pipes around the engine compartment, somewhere is usually a small gadget in a pipe with a glass window in it which allow you to see the gas/liquid passing (or at least bubbles in the liquid gas), find this and clean the glass so that you can see inside. Run the engine with the a/c off and watch the glass and then get somebody to switch on the a/c, you should be able to see the gas/liquid start to flow if the pump is working OK.