Home & Garden0 min ago
Tyre Pressure Machines
I've been to two garages to check my tyre pressures. I have no idea if I have inflated them to the correct pressure.
The old machines were easy. You connected the nozzle to your tyre valve and the pressure of the tyre came up on a little gauge. You then inflated the tyre to the correct pressure, job done.
Now, you have to put the pressure you want on to the dial and engage the nozzle. Nothing seems to happen until the gauge starts to fall, in my mind, deflating the tyre.
Panic and remove nozzle quickly!!!!!! What am I doing wrong.
The old machines were easy. You connected the nozzle to your tyre valve and the pressure of the tyre came up on a little gauge. You then inflated the tyre to the correct pressure, job done.
Now, you have to put the pressure you want on to the dial and engage the nozzle. Nothing seems to happen until the gauge starts to fall, in my mind, deflating the tyre.
Panic and remove nozzle quickly!!!!!! What am I doing wrong.
Answers
Best Answer
No best answer has yet been selected by chrissa1. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.Because your tyres are below the pressure you have set, so as you start the pressure on the display will drop to the pressure it detects in your tyres, it will then begin to pump them off before cutting out at the pressure you have specified. Without wishing to teach anyone to suck eggs, you are sure that both you and the machine are working either in Bar or PSI and not mixing and matching?
PSI, Fitzer.
That is probably where I am going wrong. It doesn't tell you that the machine doesn't start working straightaway. The old ones showed you immediately what your tyre pressure was and you acted accordingly. Increasing or decreasing the pressure accordingly.
Why do they to "make something more up to date?" If it ain't broke, why fix it??
Rainy over. Thanks for your input, all. Another visit to the garage, methinks.
That is probably where I am going wrong. It doesn't tell you that the machine doesn't start working straightaway. The old ones showed you immediately what your tyre pressure was and you acted accordingly. Increasing or decreasing the pressure accordingly.
Why do they to "make something more up to date?" If it ain't broke, why fix it??
Rainy over. Thanks for your input, all. Another visit to the garage, methinks.
I love them, so easy provided you are sure they are accurate. Set the pressure on the machine, put nozzle on tyre, hold it steady and wait for loud beep, remove and move on to next tyre. I check the tyres at home (once cool) after I have checked them at the garage to be sure(ish) that the garage gauge is right.
Related Questions
Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.