ChatterBank6 mins ago
Water Leaking From Base Of Toilet
Every now and again I find water coming from the base of the toilet. It's not gushing and there's not a big pool but you can see the water is coming from underneath. It runs along the grouting between the tiles on the floor. It doesn't seem to do it when you flush, just randomly appears overnight (never through the day).
Have had a couple of people to look at it. One a friend of the family and another a proper plumber. Both were puzzled and couldn't tell me what the problem was.
I've looked on the internet and lots of sites mention a wax seal. I said this to both people and they didn't seem to know what I was on about!
Any clues/ideas what to try next?
Have had a couple of people to look at it. One a friend of the family and another a proper plumber. Both were puzzled and couldn't tell me what the problem was.
I've looked on the internet and lots of sites mention a wax seal. I said this to both people and they didn't seem to know what I was on about!
Any clues/ideas what to try next?
Answers
Best Answer
No best answer has yet been selected by buffymad. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.The wax seal you've mentioned is the probable suspect, in my opinion. Firstly, it's not visible until the toilet is removed. Here in the U.S., the toilet base is held down by a bolt on each side that's usually covered on the base of the otilet by a small round ceramic cover. It's not glued down and pops off rather easily leaving the 'nut' which is then unscrewed to release the toilet.
The toeilet (again, here in the U.S.) fits into the wax ring which is usally bright yellow in color and bout 4 inches across and the ring itself is about 2 inches in diameter. It's meant to be placed onto the base and toilet simply fits into it. The plumber would place the toilet into the ring and then rock it back andforth until it seats solidly and then replaces the nuts, being extremely careful not to tighten to securely else face the breaking of the ceramic base on the toilet.
Wax ring looks like this:
https:/ /www.pl umberss tock.co m/produ ct/3450 /no-see p-10-to ilet-ga sket-wa x-ring- with-bo lts/?gc lid=CKu mgZ7R1r 0CFWXl7 AodVzwA vw
Good luck!
The toeilet (again, here in the U.S.) fits into the wax ring which is usally bright yellow in color and bout 4 inches across and the ring itself is about 2 inches in diameter. It's meant to be placed onto the base and toilet simply fits into it. The plumber would place the toilet into the ring and then rock it back andforth until it seats solidly and then replaces the nuts, being extremely careful not to tighten to securely else face the breaking of the ceramic base on the toilet.
Wax ring looks like this:
https:/
Good luck!
-- answer removed --
No cracks anywhere, both plumbers said that. One wondered if perhaps the cistern was dripping and causing overflow but then he said there was no evidence of that as everything was dry where it needed to be. He adjusted the water level and now it's not flushing very well either, grrr!
Water is def coming from underneath base of toilet, nowhere else and def not condensation.
Water is def coming from underneath base of toilet, nowhere else and def not condensation.
With a close-coupled system, Buffers, I think your plumber would have noticed any leak between the pan and the cistern. It's usually fairly easy to trace.
Don't dismiss the hairline crack possibility. What you see is only the outer part of a WC pan. It doesn't carry any water. The inner bowl and outlet are mostly hidden from view.
Don't dismiss the hairline crack possibility. What you see is only the outer part of a WC pan. It doesn't carry any water. The inner bowl and outlet are mostly hidden from view.
-- answer removed --
-- answer removed --
Related Questions
Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.