Netgear Wn1000Rp Booster

[alphaxray]

My NETGEARWN1000RP keeps asking for a WPA 2 password can anyone please tell me where I find it. Thanks Rick

[UKSWF]

if it hasn't been changed hopefully it should be on a sticker on the underside of the router. Good luck

[hc4361]

The default password is password.
Seriously.

[hc4361]

Hang on. As this is a booster you will need the password (or passphrase) from your router. As already said this will probably be on the bottom or back of your router.

[alphaxray]

In answer to UKSWF and hc4361 I have tried all the numbers given on the underside of the router without success . Thanks for your reply's Rick

[hc4361]

Are you at stage 4 of this guide?
http://kb.netgear.com/app/answers/detail/a_id/22703/~/wn1000rp-initial-installation

[alphaxray]

Hi hc4361 yes and then full stop because it ask's for p/w then stuck thanks again Rick

[hc4361]

How annoying. Have you changed the password since you had the router installed?

[alphaxray]

Hi hc4361 no Change of p/w I will have buy a new one and start again. Thanks Rick

[hc4361]

Noooo, don't give up yet

[hc4361]

Does your router have the WPS button?

[alphaxray]

Hi hc4361 I have just reset to factory and reset using WPS but to no avail. Thanks rick

[Tuvok]

What is the make of your router?

It may not use WPA, somyou may need to change its setting or change the booster settings.