Donate SIGN UP

Printer Problem

Avatar Image
carolminniemouse | 18:38 Tue 23rd Jun 2015 | Technology
2 Answers
Any ideas on why my Lexmark 2600 printer won't switch on, I've done the usual, checked the cables, switched it all of and back on, it was working fine the other day - now nothing.
Gravatar

Answers

1 to 2 of 2rss feed

Avatar Image
Have you checked the fuse on the plug? Do you have another power cord lead you can swap over to see if this works? Also make sure the printer is not in Sleep Mode (Flashing Power LED Light). If it is, unplug from the wall, wait 30 secs and then plug everything back in and restart. Have you recently installed any software updates. If you have, you may need to update the...
18:50 Tue 23rd Jun 2015
Have you checked the fuse on the plug?
Do you have another power cord lead you can swap over to see if this works?
Also make sure the printer is not in Sleep Mode (Flashing Power LED Light).
If it is, unplug from the wall, wait 30 secs and then plug everything back in and restart.
Have you recently installed any software updates. If you have, you may need to update the 'printer driver' software, available from the Lexmark website.

Failing that, I'm snookered. Gook luck.
Sometimes holding a power button pressed down for 10 seconds will reactivate a printer. Don't ask why; I don't know.

Hans.

1 to 2 of 2rss feed

Do you know the answer?

Printer Problem

Answer Question >>