ChatterBank3 mins ago
Wearing in new boots
9 Answers
How do I wear in new boots (Dr Martens) without getting blisters
Answers
Best Answer
No best answer has yet been selected by Wintergreen. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.It depends if you want them to look smart or not.I waggled the toes around quite hard that helped and jumped up and down on them trying to soften the spine at the back a bit. Failing that extra socks or just wearing them for a short period everyday. I found the ones with welted leather were much better but they only do them in black. I now wear a pair of Dickies which I got from a builders merchant for a bargain �39 which are excellent and the soles last longer. No VAT on safety boots.
I have been faced with the new boot isue many times over the years. The key thing to remember is, you have to break them in gradually!, a day on day off sometimes worked for me but other times, a couple of hours at a time was enough to start with.
you can also make this easier by putting plenty of wax on over night to make them supple ie Nikwax..
At work if a customer says boots are tight around the heel we suggest rubbing vaseline into the leather on the outside, but on the inside it isn't usually leather, check what the lining is before you try to put any leather softener on. There should be a materials key stuck to the boot telling u the 3 materials that make up the sole, outer and inner of the boot.