Donate SIGN UP

Cut cable on Qualcast hedgemaster

Avatar Image
rosyposy | 11:24 Fri 27th Jul 2012 | DIY
10 Answers
Mr Posy has unfortunately cut thro' the electric cable while cutting a neighbours very thick hedge. The problem is that he cut it about 3' from the trimmer itself so wants to take the short end off and replace it with the longer lead BUT he took the two wires out and now can't remember which way they go back - DUH! The two wires are blue and brown but the connecter things they go into are both just white plastic. Hope that is understandable and that someone can help TIA rosy
Gravatar

Answers

1 to 10 of 10rss feed

Best Answer

No best answer has yet been selected by rosyposy. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
This might help
Looking at the (now) opened up handle section with the cutting blade pointing to your left and the qualcast brand label the correct orientation to read in a normal way then the brown goes to left (closet to the power button) the and the blue goes to the right. I got this info by opening up mine for you!
Question Author
That is so kind of you D97x7 thank you, but I'm afraid yours seems to be different to ours - I should have said that ours is the 370, is yours? My husband is out at the moment and I can't make it look like you say. The plastic things seem to be upright in that position, one on top of the other . There is a big red handle thing on the top of the machine, is that the power?. Maybe I have read your instructions wrong? -rosy
Question Author
Oh just noticed your 2nd post, so yours will be the 380 no wonder I couldn't do it. My fault for not mentioning the model no. DUH again, two of us in this house, thanks again for replying -rosy
Sorry Rosy, it's not mine, just something I found on the internet.
Being an AC motor and also being double insulated it probably won't make any difference, however if only one wire goes to the switch it should be the brown one. If both wires go to the switch then it doesn't matter which wire goes where.
It would be a good idea to have one of these on the plug end of the cable.

http://www.google.co....qi=2&ved=0CIYBEPMCMAI
Had Mr. Posy not disconnected the wire from the trimmer I would have suggested fitting a plug/socket (the flat type used on garden power tools) at the point of the break
Question Author
Thank you all so much for your help - found it, Marden, Blue -top,Brown underneath- I will have it engraved on his forehead altho' I doubt he will forget again he had to finish the hedge by hand!!!! Thanks again - rosy X

1 to 10 of 10rss feed

Do you know the answer?

Cut cable on Qualcast hedgemaster

Answer Question >>

Related Questions

Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.