Quizzes & Puzzles3 mins ago
Cutting back conifer
I need to cut some of my conifers as they are getting to tall. So can I just cut them straight across to shorten them or am I supposed to cut at an angle/
Answers
Best Answer
No best answer has yet been selected by etype. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.Hi etype,
I dont know what type of conifer hedge you have, so I'll assume it's a Leylanii or similar, these do not sprout from old wood thats been cut back hard, so if you intend to take a lot off the top, cutting down into old wood then you will then rely on the outer branches to keep it looking green.
If it means that you have to cut into old wood (without any fresh green foliage) then I'd be inclined to have a square cut across the top or you might otherwise end up with a brown chamfered line along the top which can be seen from below. Hope thats of some help. Tbird+
I dont know what type of conifer hedge you have, so I'll assume it's a Leylanii or similar, these do not sprout from old wood thats been cut back hard, so if you intend to take a lot off the top, cutting down into old wood then you will then rely on the outer branches to keep it looking green.
If it means that you have to cut into old wood (without any fresh green foliage) then I'd be inclined to have a square cut across the top or you might otherwise end up with a brown chamfered line along the top which can be seen from below. Hope thats of some help. Tbird+