Donate SIGN UP

Toilet Push Button Cistern

Avatar Image
georgic | 19:11 Sun 06th Jul 2014 | Home & Garden
13 Answers
toilet flushes ok but then water keeps running into the pan for about two minuets before it stops.
Any idea how to cure this happening ?

Thanks
Georgic
Gravatar

Answers

1 to 13 of 13rss feed

Best Answer

No best answer has yet been selected by georgic. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
I have the same problem but it does not stop I have to move the top (lid) to stop it, it was a new toilet, cowboy plumber has long gone.
See if this helps.
http://www.youtube.com/watch?v=Kcqm_FVI_Fc
Our does this, but not all the time. If you dib the button a second time, it stops it.
Will try this tonyav
Hope it cures it, tamaris.
I have to say it does not happen all the time. I cleaned the round rubber bit, but it is still happenening maybe I needed to clean inside the hole as well I forgot, I will do later on.
Another one here.
http://www.youtube.com/watch?v=UDqtHfZTqx8
Thanks tonyav, for your good advice x
I had this problem & replaced the bit like in the 1st video that Tonynav posted. I took the part out & took it to Plumbcenter. The new part was less than £15 including vat.
Your welcome, sometimes a picture is worth a thousand words imo.
I live alone and I am best if shown something
Well it does make it easier when a film shows you how, tamaris.
-- answer removed --

1 to 13 of 13rss feed

Do you know the answer?

Toilet Push Button Cistern

Answer Question >>