ChatterBank1 min ago
Central Heating Query! Reasonable Costing?
10 Answers
Hello, I'd be grateful for any thoughts on this. My father is getting a new boiler and having his central heating system updated accordingly. He's been trying to do this as economically as possible as he doesn't have much money to spare. However, he's just been told that to replace the heated towel rail in the bathroom will now cost an extra £600 as it is not part of the central heating system, but was part of the old hot water system (I guess attached to the hot water tank which used to be upstairs..?) He needs something to heat the bathroom (e.g. a new heated rail) and they're telling him it'll be that much money because they need to run new pipes to it, and possibly from downstairs. I have no way of knowing if that's a reasonable cost or not - and I think he feels worried that he's in a vulnerable position and could be taken advantage of.
Any thoughts welcome!
Any thoughts welcome!
Answers
Best Answer
No best answer has yet been selected by Baldgrace. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.Hmm. Yes, I was a bit worried too! I think the cost is for the new pipes - it'd mean adding a new towel rail/radiator to the existing system, and the bathroom is sort of over the garage, I.e. down a little corridor from the landing/bedroom radiators, and so possibly closer/easier to connect downstairs to the new boiler site? It does sound a lot, to me, but I don't know whether adding to an existing system is expensive- they also said it'd take another day or two (which might be the costly bit!)
I recently had a radiator resited and an additional radiator added that both involved running new pipes to. I provided the radiators and thermostatic controls and the plumber provided the pipes and fittings. I was charged £180 and it took them a whole morning 8am to approx 12. They had keys to get in and when I came home all done & dusted. I thought this was a bit steep but in hindsight I did not need to take a day off work and use up my holidays and I was happy with the work. Maybe the guys doing the boiler replacement are gas engineers and not plumbers and are quoting more because it will take them longer.
Since your bathroom is rather remote from the rest of the system, it may well cost that to install a towel rail and a completely new pipe run.
But, unlikely to cost that much if the whole system is being replaced (new pipework completely.)
If the upgrade is boiler plus controls only, i.e. NO new pipe runs, then I would go for a simple 150W electric towel rail. Even if there is no socket circuit nearby, it can be powered from the lighting circuit providing that the correct isolation and fusing measures are installed as well.
If you go electric, then please remember that this is notifiable to Building Control (bathroom location.) Alternatively, have the circuit fitted by a "Part P" electrician. No Building Control needed.
Also, an RCD (earth leakage trip) would be needed. Have an electrician quote for you. It should be significantly cheaper than the £600 option.
Or........ have an electrician quote for a circuit & fitting of a wall-mounted fan heater. Heat when you need it. Much more so than a towel rail alone.
But, unlikely to cost that much if the whole system is being replaced (new pipework completely.)
If the upgrade is boiler plus controls only, i.e. NO new pipe runs, then I would go for a simple 150W electric towel rail. Even if there is no socket circuit nearby, it can be powered from the lighting circuit providing that the correct isolation and fusing measures are installed as well.
If you go electric, then please remember that this is notifiable to Building Control (bathroom location.) Alternatively, have the circuit fitted by a "Part P" electrician. No Building Control needed.
Also, an RCD (earth leakage trip) would be needed. Have an electrician quote for you. It should be significantly cheaper than the £600 option.
Or........ have an electrician quote for a circuit & fitting of a wall-mounted fan heater. Heat when you need it. Much more so than a towel rail alone.
Related Questions
Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.