Outside Tap

[slid_away]

Hi All
I moved into a new home just over 2 years ago and had an outside tap fitted. I used the tap for the first 2 years with no problems. I tried to use the tap last weekend and nothing came out , not even a dribble. I thought it was just the tap as I've had this before and all was good after changing it but this time around after I put the new tap on , there was nothing again. I checked under the sink and the isolation for outside tap is definitely on. I'm getting water to both my mains and dishwasher (outside tap spurs off from them) I've tried taking off the tap again and putting the isolation tap back on and still nothing comes out.
I can see the outside pipe run from inside to outside and there is no leak or the pipe has not previously burst.
I'm at a complete loss to why I'm having no water feed to just my outside tap, when everything off it is working fine.
Any ideas are more than welcome
Kind regards

[slid_away]

I was thinking if I'm going to the trouble of taking it off , I might as well replace it as like you said, they are hardly expensive
Thanks again alavahalf

[melv16]

The reason I mentioned filters is because I fitted a new dish washer last year. It came with a flexible pipe. I fitted the dishwasher, but it wouldn't fill with water. After much head scratching and making sure that water was getting to the pipe, I decided to call an engineer.
The problem was a filter inside the hose connector. He removed it and solved the problem. BTW, it was a new pipe, supplied by the manufacturers.