Donate SIGN UP

Water pressure in pipes

Avatar Image
sf | 10:23 Sun 03rd Oct 2004 | Home & Garden
2 Answers
My cold water tap in my bath started lossing pressure about 8 months ago and over this time has steadily decreased to a pressureless dribble. However, it has now completely stopped coming out of the tap altoghter! I live in a purpose built block in West London c 1930...it hasn't happened to anyone elses taps, does anyone know why this is happening - is it something I can fix or is it a job for a plumber? If so, does anyone know any plumbers that they can recommend in my area. Thanks very much
Gravatar

Answers

1 to 2 of 2rss feed

Best Answer

No best answer has yet been selected by sf. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
Does the basin do the same? This is likely to be on the same supply, as is any nearby loo. If it's just that tap, sounds like just a washer. First buy a selection of new washers. Then turn off the cold supply from the cistern, and undo the tap to see what's going on. Replace washer as necessary, and turn on supply again. Run tap hard for a moment to clear out any crud from the mating surfaces. If not confident, go with plan B -- the plumber.
I can do most DIY, but being cowardly with plumbing...I'd definitely go for plan B!!!

1 to 2 of 2rss feed

Do you know the answer?

Water pressure in pipes

Answer Question >>