Donate SIGN UP

Bolt Size

Avatar Image
iyappanquestions | 14:09 Sun 09th Dec 2012 | How it Works
5 Answers
In bolt size - 3/8"X1"
5/8"X1"
3/16"X1"


Which is size for 3/8",5/8",3/16". kindly explain...
Gravatar

Answers

1 to 5 of 5rss feed

Best Answer

No best answer has yet been selected by iyappanquestions. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
Not quite sure what you mean, here's an example 3/8'' means it's 3/8'' across the flats.
Bolt diameter x bolt length. Be aware that these are the dimensions of the bolt, not the head, so you will need a bigger spanner. For instance (and I'm going metric here!) a 8mm x 100mm bolt (ie 8mm diameter x 100mm long) will typically need a 13mm spanner.
It all depends on the thread. As Tony says, 3/8"AF would be American, measuring across the flats ie the width of the bolt head.

If it's old BSF (British Standard Fine ) or BSW (British Standard Whitworth) it'll be a measurement of the threads, so the head would be something else entirely. Thank goodness those old things are largely gone now.

.... and don't get started on ANC (American National Coarse) and ANF (A N Fine)
With metric, 6mm would be the diameter of the shaft of the bolt ......
... don't ask ;o(
Also not forgetting BA (British Association) threads, found on electrical equipment, which go from the largest 0 BA down to 10 BA.
Try buying wood screws in metric, they are a nonsense, not like the old 1" eights, or 2" black japped 6's, not confusing at all. ha ha.
who thinks these up???
Its like the screw heads, there are posidrive, cross head,phillips, slotted phillips, torx etc. different screwdrivers needed for each one.
I bought some decking screws, they gave a free screwdriver bit with them. good job they did, nothing on this earth will fit the screws, and the screwdriver bit will fit nothing else in the universe.
Good night,
annie.

1 to 5 of 5rss feed

Do you know the answer?

Bolt Size

Answer Question >>