Quizzes & Puzzles18 mins ago
Motorbikes
1 Answers
how do i fix the pull start on a quad LT50. it pulls but doesnt catch to start
also a yamaha 80 wont start at all, was told by motorbike mechanic to mix some oil in with petrol, shall i drain the fuel if i do how do i do it
also a yamaha 80 wont start at all, was told by motorbike mechanic to mix some oil in with petrol, shall i drain the fuel if i do how do i do it
Answers
Only 1 answer
Best Answer
No best answer has yet been selected by juanita.s. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.
The pull (recoil) start bearings are probably b*ggered, take it apart of have a friend look at it, it's a fairly simple job.
There's no need to drain the fuel, (double check it's a two stroke -- the exhaust will have a smallish tail hole and fat curvy expansion chamber(s)) estimate how much fuel is in it and pour in the measured amount, 5% oil should do it.
Ratios do vary greatly, do a search for the specified oil/fuel ratio for the specific quad.
As for not starting, it could be an electrical fault, do a complete diagnosis, or have a buddy take a look at it.
Do some online searching as for what to check for, doesn't have to be four/two stroke relevant, just start with the basics, fuel, spark, fuel air mix etc etc.
Hope this is of some help.
There's no need to drain the fuel, (double check it's a two stroke -- the exhaust will have a smallish tail hole and fat curvy expansion chamber(s)) estimate how much fuel is in it and pour in the measured amount, 5% oil should do it.
Ratios do vary greatly, do a search for the specified oil/fuel ratio for the specific quad.
As for not starting, it could be an electrical fault, do a complete diagnosis, or have a buddy take a look at it.
Do some online searching as for what to check for, doesn't have to be four/two stroke relevant, just start with the basics, fuel, spark, fuel air mix etc etc.
Hope this is of some help.
Only 1 answer
