Quizzes & Puzzles3 mins ago
Aircon Problems
Hi folks, I have a unique problem but maybe just maybe someone has an idea. Last year I bought a car aircon refill kit, the ezchill type inc hose, gauge, trigger, cylinder. All fine and system was working after I used it. But, since then the pressure in the system although up, but I think it's low in actual coolant so it has lessened in effect. Now then... bear with me... I was going to vent the pressure from the system with the kit hose (safely) but find that when I try to remove the hose from the refill cylinder the cylinder fails to reseal so I have to leave them together. So I cant use the hose with it's much needed connector. Also when I come to refill the system, I want to make sure a good amount of coolant passes from the cylinder to the system so should I hold it upside down for longer in case I'm just putting pressure in and not the coolant. Not sure of the cylinders' inside see! Anyways, hope you can help! TIA.
Answers
Best Answer
No best answer has yet been selected by Dagman. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.I am a mechanical engineer so these tasks are a doddle, but I can't find any info on the cyl which would solve the coolant and how it expels from it. I could vent the system manually if I need. A garage did look at this and suggested the home kit as it's all they use anyways. Just hoped someone knows. I've posted on car forums too.