Quizzes & Puzzles3 mins ago
parcel shelf speakers
2 Answers
ive got a couple of 6 by 9's for my parcel shelf, they've come with leads but they attatch to the speakers on one end but are open wire on the other, where would these connect on the CD player and how can i go about wiring them up
thanks
thanks
Answers
Best Answer
No best answer has yet been selected by BillyBongOn. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.The two wires from the speaker you intend to mount on the right side of the parcel shelf will connect to the two wires labelled "Right Rear", or similar, on the back of the head unit. Likewise, the two wires from the left side speaker will connect to the two wires labelled "Left Rear", or similar. If you don't know which wires are which on your head unit you have a problem. Generally, you have two rectangular connectors on the head unit. One connector has about five or six power cables (red, black, yellow, orange and the like (blue is for electric aerial)). The other connector has eight cables for the speakers. They will be in coloured pairs, and one of each pair will have a black stripe down it. Each coloured pair goes to a speaker, one in each corner of your car, and the wire with the black stripe is the negative wire. To find out if you have the right speaker connection turn the head unit on a play with the balance and fader controls, you'll soon know if you're connect up wrong if your unit is set to right rear and sound is coming out of front left.
It doesn't matter which of the two terminals (large or small)on the speaker you connect the black striped wire to as long as you connect all the speakers the same.
It doesn't matter which of the two terminals (large or small)on the speaker you connect the black striped wire to as long as you connect all the speakers the same.
thanks for the reply skids, this sort of agrees with someone down at halfords today, they said that when I installed the CD player I would have used a plug like converter for my make of car (in my case Nissan) and that i would have to cut the Pink and Green wires (as this supposidly corresponds with the back left and back right speakers) then wire them all up using these bullet connectors thingys.
I think i have a rough idea what im doing and ive picked up some more speaker cable, I managed to re-install the door speakers today and that required some re-wiring so im hoping to give one a go tomorrow sometimes
I think i have a rough idea what im doing and ive picked up some more speaker cable, I managed to re-install the door speakers today and that required some re-wiring so im hoping to give one a go tomorrow sometimes