Donate SIGN UP

nissan primera

Avatar Image
flyinghedgeh | 15:05 Wed 21st Mar 2007 | Motoring
4 Answers
i am trying to replace the rear brake pads on my nissan primera w reg 2.0 s is there any special way to push back the calipers as they seem to be jammed or do i have to do something to the handbrake to make the move back
Gravatar

Answers

1 to 4 of 4rss feed

Best Answer

No best answer has yet been selected by flyinghedgeh. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
a lot of disc brake pads must be pushed back with a special tool that actually winds the piston in, if its got two holes in the piston face its almost certainly that type, some people have reported that you can do it with screwdrivers or c/clip pliers but i have not been able to, you will be able to but this tool off ebay or possibly machine mart , peter
You should have a manual to do jobs on any car.

Do you mean push the pistons back into the calipers if so this varies on different cars, some you need a special tool to push and at the same time turn the pistons either left or right, forcing them back without turning can damage them.

You can use a pair of pliers to do this.
you need a piston wind back tool.available from most car parts/accessories shops.
I also had this problem on the rear brakes i thought the caliper was faulty now i need to go and check whether i need to wind the piston back.I never had any problems with the front brakes .Did it work for you ?

1 to 4 of 4rss feed

Do you know the answer?

nissan primera

Answer Question >>