Crosswords0 min ago
Pink Noise
2 Answers
If anyone is interested Pink Noise is as follows:
Pink noise or 1/ƒ noise (sometimes also called flicker noise) is a signal or process with a frequency spectrum such that the power spectral density (energy or power per Hz) is inversely proportional to the frequency. In pink noise, eachoctave carries an equal amount of noise power. The name arises from being intermediate between white noise (1/ƒ0) and red noise (1/ƒ2) which is commonly known as Brownian noise.
Within the scientific literature the term 1/ƒ noise is sometimes used a little more loosely to refer to any noise with a power spectral density of the form
where ƒ is frequency and 0 < α < 2, with α usually close to 1. These "1/ƒ-like" noises occur widely in nature and are a source of considerable interest in many fields. The distinction between the noises with α near 1 and those with a broad range of α approximately corresponds to a much more basic distinction. The former (narrow sense) generally come from condensed matter systems in quasi-equilibrium, as discussed below.[1] The latter (broader sense) generally correspond to wide range of non-equilibrium driven dynamical systems.
The term flicker noise is sometimes used to refer to 1/ƒ noise, although this is more properly applied only to its occurrence in electronic devices due to a direct current. Mandelbrot and Van Ness proposed the name fractional noise (sometimes since called fractal noise) to emphasise that the exponent of the spectrum could take non-integer values and be closely related to fractional Brownian motion, but the term is very rarely used.
Pink noise or 1/ƒ noise (sometimes also called flicker noise) is a signal or process with a frequency spectrum such that the power spectral density (energy or power per Hz) is inversely proportional to the frequency. In pink noise, eachoctave carries an equal amount of noise power. The name arises from being intermediate between white noise (1/ƒ0) and red noise (1/ƒ2) which is commonly known as Brownian noise.
Within the scientific literature the term 1/ƒ noise is sometimes used a little more loosely to refer to any noise with a power spectral density of the form
where ƒ is frequency and 0 < α < 2, with α usually close to 1. These "1/ƒ-like" noises occur widely in nature and are a source of considerable interest in many fields. The distinction between the noises with α near 1 and those with a broad range of α approximately corresponds to a much more basic distinction. The former (narrow sense) generally come from condensed matter systems in quasi-equilibrium, as discussed below.[1] The latter (broader sense) generally correspond to wide range of non-equilibrium driven dynamical systems.
The term flicker noise is sometimes used to refer to 1/ƒ noise, although this is more properly applied only to its occurrence in electronic devices due to a direct current. Mandelbrot and Van Ness proposed the name fractional noise (sometimes since called fractal noise) to emphasise that the exponent of the spectrum could take non-integer values and be closely related to fractional Brownian motion, but the term is very rarely used.
Answers
1 to 2 of 2
Best Answer
No best answer has yet been selected by Handbaglady. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.1 to 2 of 2
Latest Posts
ChatterBank1 min ago
Film, Media & TV2 mins ago
ChatterBank9 mins ago
ChatterBank14 mins ago
