Crosswords2 mins ago
Windows 7 System Restore
4 years ago , with my old XP laptop, I vowed never to use system restore again when I found all the restore points were empty when I most needed one, and I have managed fine without it since because it made me start taking backups seriously. But now I have a new W7 computer I decided to give it another go and so I am in the routine of creating a restore point first thing every morning since it only takes a few seconds.
I've used these restore points a few times so far without a problem until today. After the restore the PC booted up into a half-cocked mode - numerous programs including those in the control panel wouldn't load or would just become unresponsive once they had. I tried restarting several times including powering off, giving it a few minutes each time before trying to do anything, but without success. So I tried restoring from the point saved at the start of yesterday, and everything is now ok.
I have a couple of questions: was I simply unlucky with the restore point I created at the start of today or are restore points that turn out to be effectively duff quite common? Also the restart after the restore failed to load the desktop - there was just a blank screen - but Windows did recognise Ctrl-Alt-Del and a power off was needed to get it running properly; is this usual after a system restore?
I've used these restore points a few times so far without a problem until today. After the restore the PC booted up into a half-cocked mode - numerous programs including those in the control panel wouldn't load or would just become unresponsive once they had. I tried restarting several times including powering off, giving it a few minutes each time before trying to do anything, but without success. So I tried restoring from the point saved at the start of yesterday, and everything is now ok.
I have a couple of questions: was I simply unlucky with the restore point I created at the start of today or are restore points that turn out to be effectively duff quite common? Also the restart after the restore failed to load the desktop - there was just a blank screen - but Windows did recognise Ctrl-Alt-Del and a power off was needed to get it running properly; is this usual after a system restore?
Answers
Best Answer
No best answer has yet been selected by bibblebub. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.
-- answer removed --
Sorry.... Was watching the end of Sherlock...
right, you do not need an internet connection to do a standard windows system restore, but as to why it didn't boot the first time after the restore.... No idea, but it obviously got stuck in the boot up somewhere, if it was a regular thing you can turn on boot logging or simply start in safe mode and watch to find out where the problem is.... but as it's only a one off I'd ignore it this time....
You did say task manager worked, so you should have been able to run explorer.exe manually from the new process button. and then just restarted the computer without powering off BTW.
However.... creating a restore point every day is hugely over the top, system restore only rolls back system changes, it does not care about your personal files, so unless you are making huge system changes everyday there really is no point in creating a restore point every day, it's NOT a backup.
(personally, I hate system restore BTW... fix the problem rather than ignore it and restore to an earlier date, because if you don't fix the problem it will very likely come back again)
right, you do not need an internet connection to do a standard windows system restore, but as to why it didn't boot the first time after the restore.... No idea, but it obviously got stuck in the boot up somewhere, if it was a regular thing you can turn on boot logging or simply start in safe mode and watch to find out where the problem is.... but as it's only a one off I'd ignore it this time....
You did say task manager worked, so you should have been able to run explorer.exe manually from the new process button. and then just restarted the computer without powering off BTW.
However.... creating a restore point every day is hugely over the top, system restore only rolls back system changes, it does not care about your personal files, so unless you are making huge system changes everyday there really is no point in creating a restore point every day, it's NOT a backup.
(personally, I hate system restore BTW... fix the problem rather than ignore it and restore to an earlier date, because if you don't fix the problem it will very likely come back again)
Thanks chuck, it just didn't cross my mind to run explorer.exe even though I've done exactly that quite often in the past.
I've only started with the daily restore points in the pasty week and since everything's ok at the end of each day I thought that it might reduce the amount of program re-installing etc required if there were a problem. I keep my personal data completely separate and backed up - I don't even use the libraries for pictures etc. - so the restore points aren't because of that, it's all because I typically install several programs a day just to have a look at them and (most times) uninstall them immediately. Now and then one of those screws things up which is when system restore is the quickest (but not only) way to get things back to normal.
I've only started with the daily restore points in the pasty week and since everything's ok at the end of each day I thought that it might reduce the amount of program re-installing etc required if there were a problem. I keep my personal data completely separate and backed up - I don't even use the libraries for pictures etc. - so the restore points aren't because of that, it's all because I typically install several programs a day just to have a look at them and (most times) uninstall them immediately. Now and then one of those screws things up which is when system restore is the quickest (but not only) way to get things back to normal.
If you want to install that many things just to look at them I'd suggest installing VMplayer and then setting up a virtual copy of windows7, get a clean install and then backup the Virtual machine. you can then install your "test" programs in the virtual environment and if it goes tits up you can just copy the entire virtual machine back over from your backup.
-- answer removed --
"A restore from a Restore Point is an absolute last resort"
No it isn't. According to Microsoft themselves http://windows.micros...hat-is-System-Restore if the installation of a program causes Windows to behave unpredictably and uninstalling doesn't fix the problem then that is when one can use system restore - and those are the only circumstances in which I have been using it. Restoring a disc image back-up is more of a last resort and was something that I was trying to avoid (but it would have been the next step).
No it isn't. According to Microsoft themselves http://windows.micros...hat-is-System-Restore if the installation of a program causes Windows to behave unpredictably and uninstalling doesn't fix the problem then that is when one can use system restore - and those are the only circumstances in which I have been using it. Restoring a disc image back-up is more of a last resort and was something that I was trying to avoid (but it would have been the next step).
-- answer removed --
Recover deleted files and folders in a few easy steps! Hetman Uneraser is simple to use yet yields impressive results in recovering most of the lost data from all kinds of media. Supporting hard disks, USB drives, memory cards, and many other types of storage media, Hetman Uneraser can restore data from all types of FAT and NTFS disks. The file recovery software makes it easy to get back deleted files and folders as well as data lost after virus attacks, system failures, hard disk damage, and memory card corruption.
Using Hetman Uneraser could not be simpler. Just select the disk that used to contain your files, and Hetman Uneraser will perform the complete scan automatically. You can select, filter, sort, and preview the files it discovers before performing the data recovery step.
The free evaluation version is instantly available, and allows you previewing deleted files. There is an unconditional, 100% guarantee that the files that can be previewed correctly are fully recoverable!
Key Features:
• Recovers all types of files: digital pictures and RAW files, Word and Excel documents, audio and video files, compressed archives, email, and many other types of data;
• Unerases deleted files, recovers files and folders from formatted and repartitioned disks, restores lost pictures from all types of memory cards such as SD, SDHC, Compact Flash, Memory Stick, and so on;
• Recovers data from corrupted and inaccessible hard drives and disks after a system failure. Supports all versions and revisions of NTFS and FAT file systems;
• Recovers files removed from Windows Recycle Bin.
For more information: hetmanrecovery.com
Using Hetman Uneraser could not be simpler. Just select the disk that used to contain your files, and Hetman Uneraser will perform the complete scan automatically. You can select, filter, sort, and preview the files it discovers before performing the data recovery step.
The free evaluation version is instantly available, and allows you previewing deleted files. There is an unconditional, 100% guarantee that the files that can be previewed correctly are fully recoverable!
Key Features:
• Recovers all types of files: digital pictures and RAW files, Word and Excel documents, audio and video files, compressed archives, email, and many other types of data;
• Unerases deleted files, recovers files and folders from formatted and repartitioned disks, restores lost pictures from all types of memory cards such as SD, SDHC, Compact Flash, Memory Stick, and so on;
• Recovers data from corrupted and inaccessible hard drives and disks after a system failure. Supports all versions and revisions of NTFS and FAT file systems;
• Recovers files removed from Windows Recycle Bin.
For more information: hetmanrecovery.com