Body & Soul1 min ago
High Temperatures
15 Answers
My woman's PC has an issue. Froze a couple of times and needed turning off. A preliminary examination using Speedfan indicated a temperature problem. I've just opened up the side, vacuumed it out paying particular attention to the fans. Turned the PC back on and rechecked, to see it hadn't been cured.
Both "Temp1" and "Temp2" are allegedly set to ACPI, which doesn't really tell me much. Both show 106° C.
Anyone know what exactly what it is that's getting hot very fast, and how it can be fixed ?
Cheers.
Both "Temp1" and "Temp2" are allegedly set to ACPI, which doesn't really tell me much. Both show 106° C.
Anyone know what exactly what it is that's getting hot very fast, and how it can be fixed ?
Cheers.
Answers
Why don’t you just take it to your local repair shop? I’m sure it would only be a few quid.
10:08 Tue 07th May 2019
-- answer removed --
Ok. Managed, with a bit of a struggle and concern that the fastenings might break, to remove the fan/fins item, and then separate them. The fins had a little more dust on them but not so much as one would unduly worry about.
Of course, the now solid thermal gunge is now in two bits, some on the fin side, the other on the processor lid. Would need to go buy replacement (oh where is Maplin when you need them ?) but wondering what the best way to clean the old stuff off is, without scratching nor ruining the processor lid and the heatsink side. Any expert advice ?
Of course, the now solid thermal gunge is now in two bits, some on the fin side, the other on the processor lid. Would need to go buy replacement (oh where is Maplin when you need them ?) but wondering what the best way to clean the old stuff off is, without scratching nor ruining the processor lid and the heatsink side. Any expert advice ?
Took it to a repair shop. Turns out The heatsink/fan appeared for all the world to be on firmly and properly, but when he removed the motherboard, it was clear only 2 of the pillar/clips had been right, and it neeeded the motherboard to be removed, and a pair of tweezers and patience, to tease the other two through properly.
After that the heating was fine, so my attempt would have been ok but for the pillars deceiving all that they were home.
The trouble then was that he found the PC was only going to sleep (errror code 04) instead of off. And that the SSD drive was only part healthy. After a lot of testing it was determined that the SSD drive lead must have been faulty and I'm told making the SATA driver go wrong and also messing up the SSD ! That was unexpected and costly. New drive required.
And has now led to a second issue that I'll address in a follow up thread.
After that the heating was fine, so my attempt would have been ok but for the pillars deceiving all that they were home.
The trouble then was that he found the PC was only going to sleep (errror code 04) instead of off. And that the SSD drive was only part healthy. After a lot of testing it was determined that the SSD drive lead must have been faulty and I'm told making the SATA driver go wrong and also messing up the SSD ! That was unexpected and costly. New drive required.
And has now led to a second issue that I'll address in a follow up thread.