Quizzes & Puzzles31 mins ago
Alpha Romeo 174
3 Answers
I have moisture in my headlight of my 147 Alpha has anyone experienced this and any clues how to cure it tried drilling hole and hair dryer.
Answers
1 to 3 of 3
Best Answer
No best answer has yet been selected by bettyjoan. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.
If it is a sealed unit, then it is likely that the seal has failed to allow moisture in.
Heating the lens (to remove the condensation) will only drive off the moisture, remaining within the unit to condensate once it cools down. I doubt if a small hole drilled in the unit would allow the moisture to escape completely.
Even if you were to remove the complete unit from the vehicle and place it in an oven (at say 70C) and then plug the drilled hole – moisture would return via the original failed seal.
However if you can drive off the moisture from the lens for a duration long enough to pass an MOT test – it might be worth doing.
Heating the lens (to remove the condensation) will only drive off the moisture, remaining within the unit to condensate once it cools down. I doubt if a small hole drilled in the unit would allow the moisture to escape completely.
Even if you were to remove the complete unit from the vehicle and place it in an oven (at say 70C) and then plug the drilled hole – moisture would return via the original failed seal.
However if you can drive off the moisture from the lens for a duration long enough to pass an MOT test – it might be worth doing.
Did you mean Alfa 147?
http://
The othere side's available too.
http://
The othere side's available too.
1 to 3 of 3
Related Questions
Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.