Quizzes & Puzzles12 mins ago
Economy 7 Meters
23 Answers
How does an economy 7 meter know it is time to change between rates?
Do they get sent a message, or do they have an internal clock? If it's a clock, how do they reset after a power cut?
Do they get sent a message, or do they have an internal clock? If it's a clock, how do they reset after a power cut?
Answers
Best Answer
No best answer has yet been selected by Hopkirk. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.I had a new meter (NOT a smart one) fitted about 3 years ago and I can check whether it's on day or night rate. There's also a clock on our water heater, which is easy to check. The time changes are done by the electricity company. The clocks seem to automatically correct after a power cut - don't know how!
I have one meter covering night rate and day rate, so just one spinning wheel. The only way I can see whetehr it is noght rate or day rate is to wait 5 minutes and see which dial moves ever so slightly. Sometimes it doesn't seem to move unless I put something on like the kettle and washing machine. There must be an easier way.
Hopefully it is done by the power companies so i don't have to worry about power cuts casuing the timings to slip but I am not convinced - do you have a link please?
Hopefully it is done by the power companies so i don't have to worry about power cuts casuing the timings to slip but I am not convinced - do you have a link please?
I have done the kettle trick to check what time it flicks over but it was a real pain as I have to clamber over piles of rubbish in my garage to get to see it and it really needs about 5 big items on to make the digits change quickly enough.
I really wanted to check what time it starts as well but I can't face going out at around midnight/1 am/2am to check.
I wonder if a smart meter would help.
I really wanted to check what time it starts as well but I can't face going out at around midnight/1 am/2am to check.
I wonder if a smart meter would help.
I don't think that link answer sthe queries though does it unless there are more detailed pages somewhere. Will look later. I know it is supposed to cover 7 hours but am not sure whethn it starts and finishes and there is a possibility it's not a continuous 7 hours- when it was first fitted i was told it could be in 2 blocks -say 00:00-2:00 and then 3:00- 8:00
Yes, but it says "The best way to find out your exact Economy 7 hours is tolook at your meter around the times shown on this map.
As a supplier we don’t have access to your exact times."
The question Hopkirk is asking is how is that managed- is there a clock in your meter (I take it there is which is why I was told the timings cannot be certain), or does your supplier do it.
As a supplier we don’t have access to your exact times."
The question Hopkirk is asking is how is that managed- is there a clock in your meter (I take it there is which is why I was told the timings cannot be certain), or does your supplier do it.
Our meter always has the exact & correct time displayed.In fact I always look at it as soon as I wake up to see what the time is. It updates the time automatically for the summer /winter hours on or off. I was told the electricity companies send out signals to keep the time correct on all their meters. I once stood and watched it at 2am in the morning when the extra hour was due to go on. (sad?) Yes exactly on 2am it jumped forward to 3am. After a power cut it instantly goes back on to the exact correct time. So it can't be just an internal clock. Our cheap rate is midnight to 7am , which is why the tariff is called Economy 7 (7 hours to 7am)
At one time we had a washing machine that you could set to automatically start the wash as soon as the cheap electricity started.
At one time we had a washing machine that you could set to automatically start the wash as soon as the cheap electricity started.