Please help! Problem with pc!

[filthiestfis]

Hi
Since 2 days ago, my PC has been misbehaving. Everytime I switch it on it eventually restarts itself after flashing a blue screen with words for a milisecond. It just keeps restarting itself. What can I do? I have tried going into safemode but it keeps freezing, so I cant even fix the problem via safemode. Here is the microsoft report on it posted below as an answer:

Error caused by a video device driver

[filthiestfis]

Error caused by a video device driver

Thank you for sending an error report to Microsoft.

Error report summary

Error type Windows stop error (A message appears on a blue screen with error code information)
Solution available? Yes
What does this error mean? You received this message because a device driver installed on your computer caused the Windows operating system to stop unexpectedly. This type of error is referred to as a "stop error." A stop error requires you to restart your computer.
Cause A video adapter device driver
Computer symptoms A message appears on a blue screen with error code information:

STOP 0x000000EA THREAD_STUCK_IN_DEVICE_DRIVER
- or -
STOP: 0x100000EA THREAD_STUCK_IN_DEVICE_DRIVER_M

Action for you to take

We have analyzed your error report and there are two solutions for this problem for you to choose between.

+ Solution 1: Install the most current driver for your video card
Go to the Microsoft Update website to see if there are any updated drivers for your video card. A driver is software that enables hardware or devices (such as a printer, mouse, or keyboard) to work with your computer. Every device needs a driver in order for it to work. If there are any drivers listed, you should install them.
If there are no updated drivers at Microsoft Update, and you know the manufacturer of the video card, contact the card manufacturer's product support service for assistance.
If there are no updated drivers at Microsoft Update, you don't know the name of the manufacturer of the video card, and you need more help diagnosing and resolving this problem, contact your computer manufacturer's product support service.

[filthiestfis]

Solution 2: Manually decrease Hardware Acceleration for your video adapter
This procedure prevents the display driver from programming the hardware incorrectly, but you may lose some display functionality and performance. Although you can increase the hardware acceleration settings higher than None to regain functionality and performance, these settings increase the chance that the issue will occur again. For maximum stability, leave hardware acceleration turned off.

Click Start, click Control Panel, and then double-click Display.
Click the Settings tab, and then click Advanced.
Click the Troubleshoot tab, move the Hardware Acceleration slider to None, and then clear the Enable Write Combining check box.
Click OK, and then click OK.
Note: This procedure prevents the display driver from programming the hardware incorrectly, but you may lose some display functionality and performance. Although you can increase the hardware acceleration settings higher than None to regain functionality and performance, these settings increase the chance that the issue will occur again. For maximum stability, leave hardware acceleration off.

[filthiestfis]

the thing is: how can i enter the computer when it keeps crashing in safe mode? how can i fix this problem? i am not a techie so need simple steps!
will i have to reinstall windows because of this? :(

[fiesata]

You need the original Windows CD - boot from the Cd press R for recovery console

try the fixboot or fixmbr initially if this doesn't work try others on the list (type help for details of what they are) I know this sounds obscure but it is trial and error

Unless you have recently updated your graphics driver it may not be that whatever MS say!!