white knight tumble dryer

baggio65 | 12:25 Sat 24th Jan 2009 | Technology

3 Answers

I have a White Knight condenser tumble dryer and it has stopped heating up. The drum is still turning but no heat. I know this is probably a thermostat fault but is it the inlet thermostat or the or the TOC thermostat that is needed. Any help would be appreciated.

avg

Virgin TV Box

Answers

1 to 3 of 3

Best Answer

No best answer has yet been selected by baggio65. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.

susan1958

I have one of these, which occasionaly has the same problem.
There is a reset button on the back which sometimes comes out if the tumbler gets too hot (build up of fluff in door). Press the reset button back in, clean out any fluff from filter and try again.

if it's not this then I'm afraid I cannot help.
:-)

ChuckFickens

just as likely to be a blown element too!

you need a meter to check for continuity and check the thermostat and element to see which it is.

baggio65

Question Author

Thanks for your suggestion Susan. I pulled it out pressed the reset button and HEY PRESTO we're going again. Much appreciated. Thanks..........

1 to 3 of 3

Do you know the answer?