News1 min ago
Worcester Heatslave Senior 12 Boiler Problems
2 Answers
The pilot light on the above boiler would not stay lit and I have replaced the thermocouple with a HSS-001 Universal Thermocouple length 900mm. The existing one was 600mm. The pilot light still won't stay lit.
I followed the instructions for re-lighting the boiler, i.e. everything switched OFF, electric supply, thermostat controls & timers, but still the pilot light still won't stay lit.
Am I missing something?
I believe the thermocouple is the usual source of the problem when the pilot light won't stay lit.
Any suggestions?
I followed the instructions for re-lighting the boiler, i.e. everything switched OFF, electric supply, thermostat controls & timers, but still the pilot light still won't stay lit.
Am I missing something?
I believe the thermocouple is the usual source of the problem when the pilot light won't stay lit.
Any suggestions?
Answers
Best Answer
No best answer has yet been selected by flipflop104. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.Flipflop, As you state, the thermocouple is the usual source
for this problem, but alas, it is not always the case.
It is possible that the thermo-electric valve ( which is incorporated in the actual gas valve ) may have failed.
Suggest you acquire the services of a corgi registered engineer.
Hope this helps.
for this problem, but alas, it is not always the case.
It is possible that the thermo-electric valve ( which is incorporated in the actual gas valve ) may have failed.
Suggest you acquire the services of a corgi registered engineer.
Hope this helps.