ChatterBank1 min ago
ford mondeo remote locking key preblems
7 Answers
I had a new battery fitted now the remote doesn't work is it possible to DIY the re code or do I have to take it to ford dealer to re code or a new key purchase
Answers
Best Answer
No best answer has yet been selected by tezestwing. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.You can do it yourself. if it's the radio transmiting type as opposed to the infrared type (Ford fitted both types)
First open the car with the key and lower the drivers side window.
get out of the car and lock the door with the window still open.
Wait till the alarm LED on the dash board starts to blink and reach in through the window and insert the key in the ignition and turn it on until the dash lights come on.
The LED will light constantly for about two secs then go out. Your key should now be reprogrammed with the correct code.
remove the key point it at the car and press the button :)
Good luck
First open the car with the key and lower the drivers side window.
get out of the car and lock the door with the window still open.
Wait till the alarm LED on the dash board starts to blink and reach in through the window and insert the key in the ignition and turn it on until the dash lights come on.
The LED will light constantly for about two secs then go out. Your key should now be reprogrammed with the correct code.
remove the key point it at the car and press the button :)
Good luck
Saw this on a forum,it may be of use to you.
See the post by "Terry" with reprogramming procedures.
Good Luck
http://www.ilexa.co.uk/forum/index.php?topic=7 5.msg26246
See the post by "Terry" with reprogramming procedures.
Good Luck
http://www.ilexa.co.uk/forum/index.php?topic=7 5.msg26246
I found this guide for both types really straight forward and easy to use:
http://www.mirez.co.uk/KeyProg.htm
http://www.mirez.co.uk/KeyProg.htm
Thanks for all the post but I am still minus remote Phil when I put my arm through the side open window and turn the key to on, the alarm sounds immediately and I have to unlock the door to silence it and abort the process.
pauln and tigga i have gone through all the variants and get the LED dash light to respond on for 20 seconds but there is no response when I press unlock or lock buttons within that time.
Big Bri not quite sure where the central locking control module is when I remove the green plug what part does the key play I need a bit more info on that one Bri .
I will have to have another go time permitting thanks again all Tez
pauln and tigga i have gone through all the variants and get the LED dash light to respond on for 20 seconds but there is no response when I press unlock or lock buttons within that time.
Big Bri not quite sure where the central locking control module is when I remove the green plug what part does the key play I need a bit more info on that one Bri .
I will have to have another go time permitting thanks again all Tez
Related Questions
Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.