Quizzes & Puzzles2 mins ago
Mower Oil Change ?
12 Answers
Next time my mower runs out of fuel, I'm planning on taking the opportunity to change the oil, thats now become black and thin.
Trouble is, I can't seem to locate the drain plug (Briggs & Stratton engine), so should I just turn the whole thing upside down and let the oil drain from the filler cap hole ?
Trouble is, I can't seem to locate the drain plug (Briggs & Stratton engine), so should I just turn the whole thing upside down and let the oil drain from the filler cap hole ?
Answers
On my old Briggs and Stratton (Sovereign Lawn mower) the drain plug was under the blade skirt.Turn mower on front end and look behind skirt.Behind blade should be a hole where you can see the drain plug with it's square Allen Key type end. Good hunting.
09:59 Mon 25th Aug 2014
Is it a cylinder or rotary mower. Drain plug will be at bottom of engine - you could tilt mower back to locate it, loosen it then chock the mower up level on something e.g. bricks and drain oil. Do have a Manual? - should be in there or google the mower type, manufacturer & manual - you may find a free one. Good idea to run mower first as warm oil will remove lots of debris as well - hope this helps
Extract from B&S manual.
Tilt the lawnmower towards the oil filler,have a container ready to catch the oil and remove the dipstick. Once the oil has been emptied,wipe clean any spillages.
Start the engine and allow it to run briefly.
Stop engine,wait one minute and check the oil level. Top up if necessary.
Tilt the lawnmower towards the oil filler,have a container ready to catch the oil and remove the dipstick. Once the oil has been emptied,wipe clean any spillages.
Start the engine and allow it to run briefly.
Stop engine,wait one minute and check the oil level. Top up if necessary.