News1 min ago
Breakdown...again!
41 Answers
My Ford Fiesta broke down last night and the AA chap said that it was a flat battery. After I told him that this seems to happen once a year during the winter he ran a diagnostic and it appear my car has faulty codes which are not communicating with each other.
Not sure whether to take it to a Ford garage or just a regular repair garage. Any advice on which is best?
Cheers
Not sure whether to take it to a Ford garage or just a regular repair garage. Any advice on which is best?
Cheers
Answers
Best Answer
No best answer has yet been selected by tiggerblue10. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.I don't know anyone Hopkirk but my dad knows they guys that do my MOTs. Here is what the report said -
Patrol found the following fault code/s:System : Transmission control 1 - 96Y / EGS 30.01.3 Status :U0155 - CAN communication to instrument cluster. Error Message : Malfunction. Error sporadic. Status :U0121 - CAN communication to ABS/ASR/ESP. Error Message : Malfunction. Error sporadic. Status :P1799 - CAN communication to ABS/ASR/ESP. Error Message : Malfunction. Error sporadic. Status :U0401 - Engine management CAN signal. Error Message : Signal improbable. Error sporadic. Status :U0404 - CAN signal from electronic selector lever. Error Message : Signal improbable. Error sporadic. Status :U0100 - CAN communication with engine control unit. Error Message : Malfunction. Error sporadic.Member advised ABS light came on, unable to select gears and engine cut out. Battery flat upon arrival. Started vehicle. Normal operation resumed. Read fault codes. CAN communication faults between all ECU's stored. Followed member home. Advised take to garage for further investigation.
Patrol found the following fault code/s:System : Transmission control 1 - 96Y / EGS 30.01.3 Status :U0155 - CAN communication to instrument cluster. Error Message : Malfunction. Error sporadic. Status :U0121 - CAN communication to ABS/ASR/ESP. Error Message : Malfunction. Error sporadic. Status :P1799 - CAN communication to ABS/ASR/ESP. Error Message : Malfunction. Error sporadic. Status :U0401 - Engine management CAN signal. Error Message : Signal improbable. Error sporadic. Status :U0404 - CAN signal from electronic selector lever. Error Message : Signal improbable. Error sporadic. Status :U0100 - CAN communication with engine control unit. Error Message : Malfunction. Error sporadic.Member advised ABS light came on, unable to select gears and engine cut out. Battery flat upon arrival. Started vehicle. Normal operation resumed. Read fault codes. CAN communication faults between all ECU's stored. Followed member home. Advised take to garage for further investigation.
When you say that it broke down – do you mean that you were driving it when it stopped working, or were you unable to start the car?
I would guess that the print out of stored fault codes might be those encountered over some considerable time – I might also expect the engine warning light to be illuminated as a result.
For some time I have been advising anyone who owns a vehicle manufactured this century to buy something like this:-
https:/ /www.eb ay.co.u k/itm/D 900-201 7-Unive rsal-OB D2-EOBD -CAN-Ca r-Fault -Code-R eader-D iagnost ic-Scan ner-Too l/26295 5779685 ?epid=1 4674497 05& hash=it em3d396 2c665:g :akIAAO Sw7GRZC Yw6
After one use, it will have paid for itself and should allow you to clear the stored fault codes.
If the car would not start – sapelesam’s advice is most pertinent, it could also be the glove box light. To check whether the boot or glove box light is on, Honest John recommends placing your phone within the boot/glove box and have it take a photograph in timing mode (with the flash off).
Given the value of the car – a garage could spend more than it is worth investigating the issue.
I would guess that the print out of stored fault codes might be those encountered over some considerable time – I might also expect the engine warning light to be illuminated as a result.
For some time I have been advising anyone who owns a vehicle manufactured this century to buy something like this:-
https:/
After one use, it will have paid for itself and should allow you to clear the stored fault codes.
If the car would not start – sapelesam’s advice is most pertinent, it could also be the glove box light. To check whether the boot or glove box light is on, Honest John recommends placing your phone within the boot/glove box and have it take a photograph in timing mode (with the flash off).
Given the value of the car – a garage could spend more than it is worth investigating the issue.