Donate SIGN UP

CORSA NOT STARTING

Avatar Image
lorrymax8 | 18:17 Sun 08th Aug 2010 | Motoring
4 Answers
fitted new coil rail and still not starting and were is the e c u i cant find it i need feed back ta its a 1.2 16v on a t reg
Gravatar

Answers

1 to 4 of 4rss feed

Best Answer

No best answer has yet been selected by lorrymax8. Once a best answer has been selected, it will be shown here.

For more on marking an answer as the "Best Answer", please visit our FAQ.
the ECU on the later model is on the right hand end of the block with 2 big plugs going to it, maybe a sensor failed - crank sensor is a common one - hard to find at back of block look for it from underneath - below starter motor i think,
new ECU is £450 or there abouts sensors about £35.
garage wont give you much change out of a grand.
scrapping it works out cheaper!
As gsr said, the crankshaft sensor is first choice.
Are you using the correct key?
Corsa has a system like FORD PATS, where the key has to operate the sensor around key barrel .. and activate the ECU.
What did you replace exactly?
Question Author
thanks gsr600 it was the crank sensor it cost less than 20 quid thanks again.lorrymax8

1 to 4 of 4rss feed

Do you know the answer?

CORSA NOT STARTING

Answer Question >>