News1 min ago
Laptop symptoms
I opened the panel underneath the fan to clean it and then I screwed it back on. After this when I tried to turn it back on it wouldn't come on. I put the AC adaptor in and the little light came on but when I pressed the power button the light went back off. Then I took the battery out then put it back in and still nothing.
This happened last time it went in to the shop and the bloke opened it all up and I think he did something to the key board.
It's and E systems laptop, any help please?
TIA
This happened last time it went in to the shop and the bloke opened it all up and I think he did something to the key board.
It's and E systems laptop, any help please?
TIA
Answers
Best Answer
No best answer has yet been selected by SKA. Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.I assume you removed the adapter allong with the battery?
if not ... do it again ... and leave it in bits 20 mins or so before you try again.
I'm not familiar with that machine .... but the ones I do see ... you don't need to unscrew or open anything .... just use a vac and suck the dust out of the vent ....
if not ... do it again ... and leave it in bits 20 mins or so before you try again.
I'm not familiar with that machine .... but the ones I do see ... you don't need to unscrew or open anything .... just use a vac and suck the dust out of the vent ....
oh dear ....
what was in the panel?
trouble with laptops is the whole case gives it strength ... loosen 1 part ... the whole thing turns into a flexy toy ...and it doesn't take much for something like this to happen ...
(I once took a battey out of a machine...lifted it by a corner and the thing folded like a sheet of paper ...)
to be honest it sounds like a screwdriver job ...
what was in the panel?
trouble with laptops is the whole case gives it strength ... loosen 1 part ... the whole thing turns into a flexy toy ...and it doesn't take much for something like this to happen ...
(I once took a battey out of a machine...lifted it by a corner and the thing folded like a sheet of paper ...)
to be honest it sounds like a screwdriver job ...