News1 min ago
Channel Tunnle
Answers
No best answer has yet been selected by hopalong . Once a best answer has been selected, it will be shown here.
For more on marking an answer as the "Best Answer", please visit our FAQ.Where would all what water go?
The channel tunnel does not contain any water.
La Manche / English Channel / North Sea contains alot of water.
Should the tunnel rupture it would fill up with sea water from the channel with a significant effect on whomsoever happens to be travelling through it at the time. The effect on the volume / sea level or otherwise of the Channel would be totally insignificant.
Ok, I am sufficiently drunk to do your research for you.
The 'Channel Tunnel' consists of two rail tunnels, and a service tunnel between them. (I didn't neeed to google thus far).
So, for each tunnel, we have a volume of;
(pi x diameter/2)� x length ie the volume of a cylinder
The two rail tunnels have an external diameter of 8.2m *� (we shall ignore the volume of the concrete lining), and the service tunnel a diameter of approximately 5m (exact internal and external dimensions are not so easy to find - I have conflicting internal measurements of 4.8m and 5.0m *� )
The sub-marine section of the tunnel has a length of 37.5km.
Therefore, the total volume of the two rail tunnels is;
(pi x 8.2 / 2)� x 37,500 x 2 m� = 12 443 082 m�
and the service tunnel;
(pi x 5.0 / 2)� x 37,500 m� = 2 313 185 m�
adding these together;
= a total volume of 14 756 267 m�
*� - http://www.engineering.com/content/ContentDisplay?contentId=41007026
*� - http://www.geologyshop.co.uk/chtunfacts.htm
[cont....]
So if the tunnels were to rupture, then nigh on 15 million cubic metres of sea water would flood in. This may seem like a lot, so let's put it in context.
Defining the boundaries of the Channel with the North Sea and the Atlantic is, at best, arbitrary. So, for the sake of argument, we will say the Channel extends from Dover to Portsmouth, a longitudinal extent of some 160 km. the narrowest part of the Channel is the Strait of Dover, (between dover and Cap gris-Nez), at 34 km.
Assuming (very generously) that this is the constant width of the channel, this gives us a surface area of ;
160 x 34 km� = 5 440 km� = 5 440 000 000 m�.
So, spread over this underestimated area, the 15 million cubic metres of sea water that would flood into the Channel tunnels, (should they rupture), would actually lower the sea level of the Channel (as defined above) by;
14 756 267 / 5 440 000 000 m
=0.00271 m
or just under 3mm (yes, millimetres).
Related Questions
Sorry, we can't find any related questions. Try using the search bar at the top of the page to search for some keywords, or choose a topic and submit your own question.