Donate SIGN UP

DIY

261 to 280 of 1665

First Previous 11 12 13 14 15 16 17 Next Last

Avatar Image
whistonian
I have an Osaki HT66 hedge trimmer which needs new blade securing bolts.Does anyone know where I can get these from,I have had no luck searching the internet.
Avatar Image
pantonsteve
hi this is a 2 part question unfortunately i had a fire in my outhouse yesterday and my lovely brick whitewashed walls are now covered in black soot so firstly what's the quickest and most effective...
Avatar Image
homedeeth
I have a nice shirt which has a considerable gap between the bottom button and the bottom of the shirt. This button undoes itself from time to time which, when walking, exposes my belly cos the wind...
Avatar Image
trt
The lights are those tiny flat ones on a strip, so do I need a transformer kind of thingy?
Avatar Image
johnny37
Sorry if this sounds a bit naive but the last one I fitted was no prob. I am waiting for Bosch to come back to me. When attaching the black inlet pipe to the machine there is a little red filter, then...
Avatar Image
Elspeth
Our recently installed toilet seat makes a loud groaning sound when it goes down. Any ideas what causes this, and how to stop it? It was OK at first but it's now an embarrassment.
Avatar Image
donnaanna
Hi Guys, I am attempting to convert the CED ligth fitting into LED. The fitting is round bathroom fitting with 4 pin ced light shaped kind of like pretzel, the fitting has starter and ballast. It has...
Avatar Image
fuggy
I want to glue a vertical piece of oak to a horizontal piece, which is part of a chair and would be lifted by one of the horizontal sections, there are no joints. Any suggestion as to the strongest...
Avatar Image
fishing81
Tried a couple of diy stores but no luck getting a replacement anyone know where they can be bought...
Avatar Image
porkchop
I intend to renovate our bathroom and would like to hear whether readers have used PVC wall panelling instead of tiles. Also, which comes out cheaper, tiles or panelling. Any advise and opinions would...
Avatar Image
pussyfoot
Hi, I have some tiny scratches on my gloss worktop where my daughter tried to rub off dried food with a nylon sponge. They are not deep scratches, what would be the best way to hide them? hank you...
Avatar Image
jesmond
friend used some carpet adhesive roll to stop her rug slipping on her dark laminate floor but has left a sticky residue behind. she hasn't tried to remove it yet as she doesn't want to do any damage...
Avatar Image
gordybarr
I have a Worcester Bosch 24I combi boiler which is 10+ years old and is discontinued. The mechanical timer is broken and keeps falling out. The boiler works fine when switched to constant but I can no...
Avatar Image
kia cat
I'd like to run power supply to my greenhouse. Using armoured cable the shortest route would be running it underground or at low level along the exterior wall. Would the cable need protection from UV...
Avatar Image
fuggy
Please see my previous post on this subject
Avatar Image
fishing81
My bird bath has a crack in the basin where it holds water(or did do) has anyone used a poxy resin to seal the crack and if so what manufacture did you use...
Avatar Image
TWR
We have 2 recliner Leather chairs, last week my recliner cable snapped so I ordered 2 from ebay, within days they arrived, it takes about 20 mins to fit these cables so the job was completed, this...
Avatar Image
waterbitch
I would like to install a coal/wood burning stove into an existing fireplace,would it need a liner?there is already a liner in situ installed for the gas fire that was there,would this be ok to use?
Avatar Image
Iggle Piggle
At work the pipes under a sink have been electrically bonded together but no connection has been made to electrical earth. I'm rusty with my knowledge but I thought that bonded pipes should be...
Avatar Image
kia cat
Friends of mine are trying to remove paint on a wall. Sanding it makes it go sticky. It's bright red and driving them mad! Any ideas please?...

261 to 280 of 1665

First Previous 11 12 13 14 15 16 17 Next Last